Quote:
|
Originally Posted by NO2
Machining brake rotors!!!!!!!!!!!!
I didn't think the rotors where machinable, the tolerances aren't there. The original rotors wear as quick as the pads. If you are a careful driver you will get 60k from them and replace with non genuine for about $300 odd if I remember or more if you are going for slotted. If you ain't careful you might get 30k. I would check if they were original rotors.
There are brake rotor threads on this forum to check out.
|
When we bought the car i looked at the rotors and pads and they did not look like the originals so they have been replaced in the past by someone.
Brakes were machined/lightly skimmed as they were glazed over and were squealing. Nothing wrong with doing that.