Quote:
Originally Posted by dirty hands
codes ? the engine check light does this model have one
or will an LED test light be eneough
next for a 2000 model
cant find a DIY fault codes list of instruction on the
bridging the wire on the diagnostic plug method and using the engine check light to flash the codes
if you have the radio code if the car needs one
you can undo the two battery terminals for a minute and clear any fault code readings
this will reset the computer
then try another test drive
|
diagnostic connector under bonnet - bridge terminal TEN to ground -LED test light or analog voltmeter connected from battery positive to terminal FEN - (marked on cover)
ignition on count pulses for codes eg,1flash followed by 2 flash = code 12