dash board rear
|
|
the back of the dash is a printed circuit no sign of any diode
where the wiring connection goes into the printed circuit it can rub off the copper contact thus giving you no circuit /contact
recheck all the fusable links and clean the fuses at each end and the
contacts
looks like it might be a faulty connection in one of the wiring loom connectors
a dry connection is possible
spray the connections with a bit of wd 40 or similar
not to hard to remove the instrument cluster to have a look before taking your car to an auto electician
my australian wiring doesnt show your type of dash so i cant help with wire colour
__________________
My car goes Brumm Brumm
|