Finding all the information I needed on Ford Forums for my SY Territory so I could remove my trims without breaking anything, and find a grommet to feed a cable through my firewall, so I could connect a cable to my battery to power my 12V car fridge for the 11 hour drive I do every week to get to work. Job done and money saved on an auto-elec. Thanks to all of you that post stuff on here for the mechanically useless!
In case anyone needs it,
Interior trim and orientation
https://fordforums.com.au/wsmpub/sx/501-05.html
I referred to a number of posts/threads for feeding cable through a firewall. I ended up going from the battery along the drivers side of the engine bay, then following a wiring loom and the bonnet release cable through a stretchy grommet down behind the fuse box. I laid the cable under the cowl driver side scuff, front door scuff plate, and the scuff bin (I had no idea of the names for these bits before Ford Forums! Lol) and out behind the driver’s seat.
This routing method would work for installing power cable to an amplifier (which seemed to be a popular thread).