For future reference. rockauto.com have some great options and delivery is usually faster than Australia post interstate.
Cheap brand, Centric, contains the rubber pieces to go inside the anti-rattle springs.
https://www.rockauto.com/en/moreinfo...=1736&jsn=1069
Motorcraft brand, to get good quality pins and springs.
https://www.rockauto.com/en/moreinfo...=1736&jsn=1075
If you have a rattle over bumps that goes away if you touch the brakes, get three 1mm M8 washers (preferably close to 17mm outside diameter) and a 0.6mm thick waved or curved washer for each side. Fit two flat washers and the wave washer on the outboard end of the pins and the third flat washer on the other end, for the (not optional) benefit of the e-type circlip that holds it all together.