Re: FORD technical service bulletin : ICC touch screen display
|
|
Hi,
Very interesting to see how you use the Arduino CAN interface to record and re-play messages.
I bought a CAN analyser from China, but haven't had time to play with it yet.
(CANalyzer-ii from ebay) It is a two-channel analyser, and it can also filter messages, or be programmed to replace CAN messages between channel 1 and 2. Not sure if it is any good, should really hook it up and see what it can do.
Ford apparently changed some of their CAN network messages from FG(1) to FG2. Probably it was to adapt the Australian models to US practices. There should be less difference from FG2 to FGX, so it may be easier to retrofit SYNC in an FG2 than it is in an FG(1).
Cheers,
|