|
26-05-2024, 10:01 PM | #1951 | |||
Regular...with metamusal
Join Date: Oct 2009
Location: Geeeloong
Posts: 6,074
|
Quote:
with the plug all you need is the one with the small magnet fitted. i have the factory wagooon wiring/sensors one x3. i tried setting up the factory unit quite a few times. even had it working on 'Ol yella [x-taxi wagooon]. but i could never get it going/working properly on the BA M7 wagooon?. i ended up fitting aftermarket sensors with my own wiring [except for the sensor part] and the trailer part [for which i will eventually throw away the factory 12 pin & replace with a flat 7 pin, with a magnet of course!]. all works great now! .... well did till i blew/contaminated the gearbox cheers Ps. all you need then is the wiring which you can easily get a hold of. and the 12 pin plug which is easy to find here or here. i will be trialling this one or this one as i don't remember what 12 pin i used? [wired up my own edition with a change to the reverse lights as well]. |
|||
This user likes this post: |
27-05-2024, 01:37 PM | #1952 | ||
Starter Motor
Join Date: Sep 2018
Posts: 8
|
Hi GTLEGEND
Was referred to you by other members as you may be able to help 2013 Ford FG EcoLpi MKII LPG We want to order a new oxygen sensor. i have seen some on ebay and other sites but the one they are selling has 4 wires. The one we have is 2 wires. My question is do we need to get a 2 wire sensor or can we use the 4 wire. Does that also mean that the FG has 2 types of sensors a 4 wire and a 2 wire one? Strange Any help would be appreciated |
||
This user likes this post: |
27-05-2024, 05:44 PM | #1953 | |||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,535
|
Quote:
Hope that helps, GT |
|||
2 users like this post: |
31-05-2024, 03:33 PM | #1954 | ||
Starter Motor
Join Date: May 2024
Posts: 6
|
I am currently looking at a BA MkII Fairlane and I am wondering what the chances would be in obtaining a Bonnet Protector, Headlight Protectors and the plastic Mud Spats for this Model. A few cars I am looking at do not have them on.
|
||
31-05-2024, 04:57 PM | #1955 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,535
|
Nothing genuine from Ford, keep an eye out on eBay, Market Place etc etc
|
||
This user likes this post: |
Yesterday, 07:32 PM | #1956 | ||
FF.Com.Au Hardcore
Join Date: Oct 2016
Posts: 618
|
hi
Many thanks Looking for part no. for Ford Ranger pj/pk and Mazda UN 4x4 model location /part front lower inner wishbone bushing [mounted in front position ] rear wishbone bushing mounted in chassis bolts nuts washers etc both wishbones lower inner bushing fasteners ,,position front and rear both LHS and RHS My vehicle is corroded in that area |
||
Yesterday, 07:40 PM | #1957 | |||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,535
|
Quote:
|
|||
This user likes this post: |