![]() |
|
|
Blue Power Racing Developments The home of Blue Power. Website Link |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Sep 2010
Posts: 21
|
Just wanted to thank you guys (Chris, Theo and Ryan) for all your hard work on what truly is a beast of a motor. The motor purrs like a kitten at idle and has a nice bellowing roar of a lion as the tacho bends its way in the clockwise direction.
![]() Very pleased with how well the car behaves in the complete rev range, Chris as I have stated to you before I am very pleased with your choice of grind on the set of sticks. I was dreading that the cam was going to be too lumpy to drive daily, but fortunately it was in good hands and the engine behaves well at low RPM. Also the low end grunt is nothing short of awesome, the bottom end of the rev range feels as responsive as the top end of the old Boss 260 at full noise! Can barely believe you can get that much power from the motor south of 3000RPM from a modular without some sort of forced induction. With already over 300rwkw I'm looking forward to what figures this motor will churn out once we get a decent plenum and throttle body set up on it and raise the rev limiter to 7500RPM. ![]() ![]() Thanks once again to the three of you at various stages throughout the build advising me on my options before I had even spent a cent, particularly you Chris for giving up your personal time whilst balancing family affairs. Greatly appreciated mate, definitely went the extra mile to help a customer. Regards, Damien. |
||
![]() |
![]() ![]() |
4 users like this post: |
![]() |
#2 | ||
BOSS 5.4L Enthusiast
Join Date: Aug 2005
Posts: 21,906
|
Sounds good Damien, what are the Specs on the Motor?
While everyone is loving S/C Big HP builds at the moment, i absolutely love the sound and feel of a tough N/A Combo. |
||
![]() |
![]() ![]() |
4 users like this post: |
![]() |
#3 | ||
Virtuous Bogan (TM)
![]() Join Date: Jan 2005
Location: TAS
Posts: 27,566
|
Yeap I am a fan of N/A aswell I appreciate the effectiveness of a blower but there is something about an engine doing it all on its own that I find appealing. I also havent seen much evidence of a FI engine (in a Falcon) being able to cop 10+ laps of circuit work. They are good for 1/4's or the quick couple of laps.
Any specs on the engine?
__________________
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
N/A all the way
Join Date: Apr 2008
Location: Melbourne
Posts: 3,459
|
The place to go for any modular build.
7500rpm ftw!!!
__________________
BA GT 5.88 litres of Modular Boss Powered Muscle 300++ RWKW N/A on 98 octane on any dyno, happy or sad, on any day, with any operator you choose - 12.39@115.5 full weight |
||
![]() |
![]() ![]() |
4 users like this post: |
![]() |
#5 | ||
Starter Motor
Join Date: Sep 2010
Posts: 21
|
Hi guys,
The short motor was once upon a time the heart and soul of the purple pig drag car ![]() ![]() The block is bored and sleeved and is now 5.8 litres of modular thunder, but unlike yours Jon it is not an MMR block (killer build thread btw). Chris had the block machined locally if my memory serves me correctly. If I have this right the short motor was initially built to be a tough N/A with intentions of a S/C ethanol set up later on when Chris was racing it. Thus my comp isn't as high as yours (I think it's around 10.5) and the H beam rods. Very happy with the outcome so far. ![]() |
||
![]() |
![]() ![]() |
4 users like this post: |
![]() |
#6 | ||
Virtuous Bogan (TM)
![]() Join Date: Jan 2005
Location: TAS
Posts: 27,566
|
Any 5.8 N/A Modular is awesome in my books, same with anything north of 300rkwks.
__________________
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
N/A all the way
Join Date: Apr 2008
Location: Melbourne
Posts: 3,459
|
Congratulations Damien, - it has been a bit lonely in 5.8 litre modular land. Nothing better than a strong N/A that can still have good street manners.
__________________
BA GT 5.88 litres of Modular Boss Powered Muscle 300++ RWKW N/A on 98 octane on any dyno, happy or sad, on any day, with any operator you choose - 12.39@115.5 full weight |
||
![]() |
![]() ![]() |
3 users like this post: |
![]() |
#8 | ||
Donating Member
![]() Join Date: Dec 2010
Location: Melbourne, Victoria
Posts: 4,771
|
Can wake up anyone sleeping in mall car parks to :P
__________________
Ride 2007 Ripcurl BF Xr6 Ute Mods to Date Ceramic Coated Pacemaker 4495s 2.5" Dual Venom exhaust, Bluepower CAI Eaton True Trac with 3.9s 20% Underdrive EcoLpi Motor RWKW: 200.0 Nm: 394 Mods to Follow Supercharger |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Regular Member
Join Date: Sep 2013
Posts: 47
|
So glad to read these kinds of threads. I was starting to think I was a freak to like the punchy NA. Coming from Windsor (302/331) land it's amazing how dam good the modular is as a starting point. This will be the first engine build I can use a factory crank and not worry about it being a hand grenade. Upper manifolds a little disappointing though. Ford should have contracted BPT.
Congrats on the build, ol' Bluepower seem to always get it right. Another BA GT they did with some GTPX cams sounded so sharp it amazed me how tight they had the tuning and as you said also the idle quality. These things are tough to tune idle with bigger cams. Last edited by GT1144; 03-10-2014 at 08:46 PM. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#10 | ||
Utes rule
Join Date: Feb 2020
Location: Tassie
Posts: 1
|
Gday fellow ford brothers i am currently getting my boss 290 fully rebuilt aiming for about 450 horses at the wheels its been taking a while so was wondering roughly how many hours it takes to do a build ?
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Mornington
Posts: 2,136
|
7 years since the last post should tell you something.
|
||
![]() |
![]() ![]() |