Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 06-10-2024, 09:44 AM   #1
cpab
Starter Motor
 
Join Date: Jun 2011
Posts: 16
Default 2016 Ford Focus LZ Trend Auto 1.5L - RH Driveshaft Issue...

2016 Ford Focus LZ Trend 6 Speed Auto 1.5L
Bought our 2016 Ford Focus 11 days ago. Since then we've driven about 150kms.

We have felt a developing issue with the brakes and/or drive shafts, over the few days since we took ownership of the car. The RH driveshaft feels like a CV problem under gentle braking.

Took it to a mates workshop for a test drive and put up on hoist afterwards.

Could anyone advise what we're looking at in the attached photo, please?

Any ideas where did the grease came from?
20241005_113016cropdmorered30.jpg
cpab is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2024, 11:12 AM   #2
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,753
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: 2016 Ford Focus LZ Trend Auto 1.5L - RH Driveshaft Issue...

Split CV boot grease?
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2024, 11:53 AM   #3
cpab
Starter Motor
 
Join Date: Jun 2011
Posts: 16
Default Re: 2016 Ford Focus LZ Trend Auto 1.5L - RH Driveshaft Issue...

Thankyou for your reply GTLEGEND.
I've had mainly Holdens and Fords over the last 60years, so I'm not familiar(yet, but learning fast) with this Focus.
I joined the UK Focus forum to see if anyone there could say what is happening here and Tomsfocus replied with:-
"If that boot isn't loose or split then I reckon someone replaced it or refitted it just before selling. If the boot was open for a while the CV joint probably wore excessively and this was just a quick bodge to get it sold."

The car was serviced by a garage nearby in July, so we'll be visiting them on Monday, to see if we can get copies of the services done there.

The sales Warehouse where we bought the car, told us that they serviced the car in their workshop, which would have to be since the service in July, so this is looking like it could have been a coverup.

We'll ring the last owner on Monday too.

According to the service book, the July service was about 87,300kms

The sales warehouse acquired the car at 87,621kms and we bought it at 87,930kms; its now about 88,100kms.

I just hope the warranty gets the job done quickly, we don't have another car now.
cpab is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2024, 10:46 AM   #4
cpab
Starter Motor
 
Join Date: Jun 2011
Posts: 16
Default Re: 2016 Ford Focus LZ Trend Auto 1.5L - RH Driveshaft Issue...

Just to clear up this problem, it has been fixed under warranty:

New RH CV Driveshaft and New Lower LH and RH Control Arms.
cpab is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:55 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL