![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
i was wondering if someone here would know where i could get my hands on short shocks for my 92 tx5 , i have lovell super low springs in the car and lovell tells me they dont have super lows for telstars i'm in melb
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
not agood idea the telstars are already quite low
you may have to chase a few mod shops to find an alternative
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
so installing stantard shockers will be ok in my car?
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
most definatly std shocks wont get you defected
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
thanks for advice
|
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Starter Motor
Join Date: Nov 2006
Posts: 8
|
If the springs are not captured when the car is wheel is off the ground then you will need shorter shocks, but most lowering springs are made to work with the factory shocks & be captured.
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
could anyone tell me how hard it is to remove original ax tx5 front struts and replacing them with gabriel shockers and what tools i would need , thanks in advance
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
Injected
Join Date: Apr 2007
Location: Melbourne
Posts: 67
|
My only advice would b watch out when removing the spring, if you slip and the spring jumps out you could be in some major pain. Most wheel places like bob jane will change the struts/springs over for about $60 and they have devices which lessen the danger and work that is needed.
|
||
![]() |
![]() ![]() |