rubber ea intake pipe cleaned! :D

[niko]

tried scrubbing a spare one i had with a brush and detergent to no avail, a mate then hit it with armoral, wow, did it work...

amoral wipes used to get intitial crap off, then cotton earbuds too get in the little corners

before;



after;

[CruizinEB]

Looks good, i will hafto do mine ,it's the same.
How do they get dirty??? :

[neb]

wow its clean ..........

[CruizinEB]

Originally Posted by neb

wow its clean ..........

I know i would of never thourt it would scrub up good

[Simmo]

i wouldnt mind getting a piece of mendrel bent chrome pipe made up to replace that bit. would look pretty sch**** i reckon.

[CruizinEB]

Originally Posted by Simmo

i wouldnt mind getting a piece of mendrel bent chrome pipe made up to replace that bit. would look pretty sch**** i reckon.

But don't they need to flex abit Because of the vibes????

[TUFED6]

When my car was NA I had an aluminium bend fitted up with a Pod, and a plastic partition so most of the engine bay temps were kept away from the intake. Seemed to work pretty well.

- John

Originally Posted by TUFED6

When my car was NA I had an aluminium bend fitted up with a Pod, and a plastic partition so most of the engine bay temps were kept away from the intake. Seemed to work pretty well.

- John

thats sexy, how much did it cost for the piece of pipe.

Niko: your very dedicated in cleaning nice job. can i pay you to clean mine =D jk well done

[Simmo]

CRUISIN EB: yeh thats why i'd need to have those rubber bits with ring clamps on both ends like you see on aftermarket turbo piping. they flex and move with the engine.

TUFED6: that looks like a great setup mate!! ive always wanted to do that but i just dont think i could knock up a partition that would do the trick.

[neb]

nice setup John... you wouldn't happen to have it still lying around somewhere and want to get rid of it? :P

[TUFED6]

I'll ask Ben if he still has it, I haven't seen it at my joint lately! I know that he still has the templates for the partition if you guys wanted to do a group buy of 10 of them or something.

- John

[Simmo]

Originally Posted by TUFED6

I'll ask Ben if he still has it, I haven't seen it at my joint lately! I know that he still has the templates for the partition if you guys wanted to do a group buy of 10 of them or something.

- John

yeh id be up for one of those partitions. im sure we could organise 10 buyers pretty easily.

[XRated]

Originally Posted by TUFED6

I'll ask Ben if he still has it, I haven't seen it at my joint lately! I know that he still has the templates for the partition if you guys wanted to do a group buy of 10 of them or something.

- John

Mate that sounds like a plan! I wanted to do something similar except have the pipe go further down and underneath the pod (would require cutting).

[neb]

Cool if he still has it that would be good... otherwise yeah I would be interested in the partition I've been thinking of doing a cold air setup similar to that.. at the moment I have a pod in my air box.. but its basically jammed in there lol. Something like this setup would probably be a bit better

[CruizinEB]

Originally Posted by niko

tried scrubbing a spare one i had with a brush and detergent to no avail, a mate then hit it with armoral, wow, did it work...

amoral wipes used to get intitial crap off, then cotton earbuds too get in the little corners

Would Inox or Tyer fome do the trick????

[neb]

Yeah Tyre foam works well on rubber bits

[CruizinEB]

Originally Posted by neb

Yeah Tyre foam works well on rubber bits

I will hafto do it after TAFE Today!

[niko]

cruizen eb: that like 10+ years of gunk/dirt build up in it, and the occasional degrease which wont do much and.... to your last comment: quite possibly, like i tried scrub and detergant and it did nothing,

inox is more a lube so dont really think thats the best stuff to be using, not really cheap either. lol

cotton buds got into the crax quite well

[CruizinEB]

Originally Posted by niko

cruizen eb: that like 10+ years of gunk/dirt build up in it, and the occasional degrease which wont do much and.... to your last comment: quite possibly, like i tried scrub and detergant and it did nothing,

inox is more a lube so dont really think thats the best stuff to be using, not really cheap either. lol

cotton buds got into the crax quite well

It was just a Thourght.

[CruizinEB]

Originally Posted by niko

cruizen eb: that like 10+ years of gunk/dirt build up in it, and the occasional degrease which wont do much and.... to your last comment: quite possibly, like i tried scrub and detergant and it did nothing,

inox is more a lube so dont really think thats the best stuff to be using, not really cheap either. lol

cotton buds got into the crax quite well

It was just a Thourght :sm_headba .

[niko]

yous cant forget, i cleaned it back to the rubber to get it overall clean, not just to make it shine, could just sprayed it with silicone tyre shine for that

[niko]

i gotta hit the filter soon, dont really have time to get all equipment out to clean it lol

[CruizinEB]

Yous is a K&N Flat panel filter,right

[niko]

ye, i have the chemical cleaner/oil stuff for it

[CruizinEB]

ok, that will be fun

[EDXR6T]

were did u get the bent pipe from?? TUFED6

[CruizinEB]

I have removed,cleand and poot the hose back on and it look like it's new
but once i hade taken it of i noticed that it was white inside and a trace of oil is this normal???

[niko]

ye would have leaked down from ya inlet manifold, and the white im not sure why it does that u suppose its mixture of water/tad bit of moisture etc

[CruizinEB]

Hang on it mite of been the air freshener the first owner pot in the air box, could this have something to do with

PS:She thort the air intake was for the air con, idiot.

[niko]

nah its not lol ive seen it on many.