|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Bar For non Automotive Related Chat |
|
Thread Tools | Display Modes |
02-11-2014, 06:15 PM | #1 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,861
|
So just wondering if anyone has bought a small cheap chainsaw off ebay?
All it will be used for is to chop small firewood for a camp fire once a week. We go camping every weekend in the summer and i don't want to use the axe anymore. Max width of small logs would be 100mm. Any advice i will take, i wont be spending any more than $200. |
||
02-11-2014, 06:24 PM | #2 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,861
|
Looking at something like this, nice short bar, small, easy to chuck in the back of the patrol with the swag
http://www.ebay.com.au/itm/NEW-Baumr...item589be2e2e5 |
||
This user likes this post: |
02-11-2014, 07:13 PM | #3 | ||
Regular Member
Join Date: Oct 2006
Location: Canberra region
Posts: 354
|
I got a larger version a while back. Went pretty good until it started leaking fuel and chainbar oil. The fuel was leaking past the filler cap as they had fitted a round o-ring which wasn't seating correctly. Square section o-ring fixed that. I'm assuming a loose tube/fitting is causing the chainbar oil to leak, but haven't checked that far yet.
As with a lot of this Chinese made stuff, you should really go over it before using as build quality/ attention to detail isn't always great. I have some other stuff from this guy which hasn't given any problems yet. Cheers Jamie |
||
02-11-2014, 07:31 PM | #4 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,861
|
Thanks mate, i've read some reviews and they seem good with warranty replacements as well. It will literally be used for max 10 minutes a week. Just need it to cut enough for the night. I usually cut with an axe but for $120 it seems stupid to keep swinging the axe.
|
||
02-11-2014, 08:01 PM | #5 | ||
3..2..1..
Join Date: Nov 2009
Location: Bellbird park
Posts: 7,218
|
Great thread, I'm looking for one for the same reason.
Bunnings have 2-3 models under $200 last time I was in there. |
||
02-11-2014, 08:07 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Sep 2013
Location: Karuah Valley
Posts: 984
|
I purchased a 36 volt chainsaw from aldi. used it this year to trim up fire wood to fit in the stove and cut slots in blocks to help split large blocks with a wedge.
as its electric you get a bad habit of using one handed -father in law had a 240 Volt for years. work purchased some name brand saw. the small ones have had issues and been hard to repair-the word is the dealers are sick of the returns and don't want to work on them.
__________________
BF11 XT EGas Wagon-SY TERRITORY AWD GHIA- Land Rover 88 .MIDCOAST NSW.
|
||
02-11-2014, 08:12 PM | #7 | ||
\/\/\/\/\/\/\/\/
Join Date: Feb 2006
Posts: 5,756
|
If you go camping every week in summer, why not buy a quality unit that will last? It sounds like it would get used enough to justify it. In my experience you get what you pay for with small motors or any tool really. To me it is worth every cent to have something that works when you want it to rather than spending all your time fixing things.
|
||
2 users like this post: |
02-11-2014, 08:14 PM | #8 | |||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
Quote:
I bought one from there for $99 and am yet to open it. I would suggest buying a cheapie from a walk in store. If something goes wrong you can walk in and have it sorted on the spot. You may save $10 buying off eBay but you need to ask what happens if something goes wrong? Send it back by post? To where? Who pays? What if it's not a warranty problem?
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
|||
2 users like this post: |
02-11-2014, 08:16 PM | #9 | ||
Banned
Join Date: Dec 2004
Posts: 8,303
|
Baumr-Ags are good for a cheapie & available on ebay. Spare parts are available from a Sydney-based dealer but the postage is a killer. I donated mine to my father-in-law as his was having a starting issue after 3 seasons of hard use & mine had its exhaust gasket let go, after 2 seasons (replacement for $3 + $26 postage from Sydney) plus it was a bit big for my needs (24"). Father-in-law also highly rates them as good for a cheapie.
Don't bother with an Ozito though. Mine (16" replacement for the Baumr-Ag) seized on me, POS. I suspect it's to do with their "recommended" 40:1 2 stroke ratio (lean much?!?). It wasn't easy to start unlike the Baumr-Ag and was hit & miss with running well. |
||
02-11-2014, 08:20 PM | #10 | ||
If it ain't broke........
Join Date: Dec 2007
Location: Sunshine Coast Qld
Posts: 18,872
|
Father in law has 2 of them, got plenty of use over a 2 year period, mainly with small stuff. Still going strong.............
__________________
Visitors welcome Relatives by appointment only |
||
02-11-2014, 08:35 PM | #11 | ||
3..2..1..
Join Date: Nov 2009
Location: Bellbird park
Posts: 7,218
|
One of the bunnings brands I saw there looks like a relabelled husqvarna, if that's the case it should be pretty decent.
|
||
02-11-2014, 08:37 PM | #12 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Posts: 3,910
|
For fathers day i got my Dad a Stihl mini boss for $299, with a free esky. I bought one of those baumr AG chainsaws a few years back. Rubbish. Carbie was stuffed from when we got it. Could never get it to run right. I've also have a little ozito saw from bunnings. Came from the factory with a split fuel line but other than that cant fault it. Three mates have the same ozito and they run great, under $200 too i think. Do yourself a favour though and grab a mini boss for a bit extra.
|
||
02-11-2014, 08:47 PM | #13 | |||
Donating Member
Join Date: May 2008
Posts: 12,933
|
Quote:
Chainsaws are a potentially dangerous tool, so the extra spend on a quality, known brand is well worth it.
__________________
The Fleet - 2016 PX MK II Ranger Cool White 2008 FG XR6 Sensation Blue 2014 FG X XR8 Emperor Red 2024 Mustang GT Race Red The Departed - 2002 T3 TS50 Blueprint 2017 Mustang GT Race Red |
|||
2 users like this post: |
02-11-2014, 09:48 PM | #14 | ||
3..2..1..
Join Date: Nov 2009
Location: Bellbird park
Posts: 7,218
|
Thats a very very good point.
|
||
03-11-2014, 07:56 AM | #15 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 786
|
I have a stihl ms290 and apsolutely cant fault it. Stihl after sales support is second to none.
Granted it is a larger and quite powerful saw, definately not in the small end of the range. I couldnt imagine having bought a cheaper of hardware store brand. Go stihl. I doubt you will regret it. |
||
03-11-2014, 05:18 PM | #16 | |||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Melbourne
Posts: 1,674
|
Those Baumr-AG chainsaws aren't too bad, if anything goes wrong they will replace the part, I had the pull cord go on me but that was more my fault because I really rip into the cords and pull it on a bit of an angle when I should have been pulling it straight up, the motors are really high compression so you do need a bit of force pulling them, but I'm sure once the motor wears in the compression will drop a bit and make it easier.
__________________
Quote:
|
|||
03-11-2014, 05:20 PM | #17 | |||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Melbourne
Posts: 1,674
|
I read all the reviews and watched the youtube video before I bought one https://www.youtube.com/watch?v=ivyyl9o5klQ
__________________
Quote:
|
|||
03-11-2014, 06:21 PM | #18 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,861
|
Cheers guys, after reading all the reviews i am pretty set on getting one. I am thinking of just getting the 10" bar now as im pretty much just cutting kindling as where we camp we cant have big fires. The 16" might be a bit overkill and a bit bigger to store in the back. Need all the room for the snowboards and swag haha
|
||
03-11-2014, 08:07 PM | #19 | |||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Melbourne
Posts: 1,674
|
Yeh get the smaller one its going to be lighter to handle and storage wise will fit nicely. I also got the electric chainsaw sharpner from them, works well and takes 2 minutes to sharpern a chain.
__________________
Quote:
|
|||
03-11-2014, 08:22 PM | #20 | ||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Yep get the little Stihl mini boss and it will last you forever. I have a big 1k+ Stihl and the baby one, I only use the big one for really big stuff now, the little one would do any normal domestic use easy.
The Bauer Ag stuff is absolute tripe. Been there, thrown it away.
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
||
04-11-2014, 08:21 PM | #21 | ||
Regular Member
Join Date: Jun 2006
Location: South East Qld
Posts: 247
|
If you come across a Poulan brand chainsaw don't be afraid to buy it, i have 2 now and i prefer them over my Stihl saw.
|
||
04-11-2014, 08:35 PM | #22 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: In my happy place
Posts: 5,432
|
I've got 2 of those bummer things I recon there not a bad thing, there no sthill or husky but but they're not a bad saw
I've cyst all my firewood since 2010 and they're both still good saws
__________________
Pariahs C.C. What could possibly go wrong I post images with postimg.cc (so I don’t forget) |
||
04-11-2014, 08:44 PM | #23 | ||
FF.Com.Au Hardcore
Join Date: Jun 2013
Location: Adelaide
Posts: 1,628
|
I bought a rok cheapie petrol from stratco for $79, and thrash the bags of it, the problem is at that price level, I cant justify replacing or sharpening the chain.
I was at a store event where the Stihl guy was doing chainsaw demos, and was really impressed by their features and quality.
__________________
____________________ 2024 TOYOTA HIACE 2019 LDV G10-GONE THANKFULLY 2009 Mitsubishi Express-GONE 2011 Honda Jazz ____________________ |
||
05-11-2014, 12:44 AM | #24 | ||
When in doubt, GAS IT!!
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
|
I bought an Echo chainsaw after talking to a guy who rented out chainsaws, among other things, and he was also selling Stihl as well as the Echo. I'd never heard of them but he told me he had 20 rental saws and the Stihls' lasted 12 months and were stuffed but the Echos' were tough as nails and all he had to do was clean and service them and put them back on the shelf ready for the next customer. I was convinced and have had mine for over 5 years and it works hard whenever I get it out. It finally failed to start one morning, a couple of months ago, after doing it's second full days work non stop cutting up logs up to 14", so I took it to the service centre and they serviced it and fitted a new spark plug and now it goes as good as new again. It's still on it's original bar but it's 3rd chain and still cold starts on it's third pull without choke. I don't treat it badly but I don't baby it either and I can't fault it. Simple, tough as nails and considerably cheaper than the equivalent Stihl, have a good look at them if you come across a dealer.
__________________
. HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body MINE- AUII Forte Meteorite, dual fuel but otherwise bog stock. MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares . |
||
This user likes this post: |
05-11-2014, 02:27 AM | #25 | ||
Regular Member
Join Date: Jul 2012
Posts: 68
|
Chinese chainsaws are rubbish. $400 and you can have a stihl, husky, Makita (made by dolmar) echo or even a solo. These will last many years. Chinese saws are throwaway items.
|
||
2 users like this post: |
05-11-2014, 09:14 AM | #26 | |||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Quote:
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
|||
05-11-2014, 01:14 PM | #27 | |||
Isn't it obvious?
Join Date: Nov 2009
Location: in a world of idiots
Posts: 5,383
|
Quote:
for 250 bucks delivered i'll be happy if it sees the job out at least
__________________
08 Strike G6E T. 10 Ergo G6E Sept 75 XB Falcon in mushroom beige, 3 on the tree 200cid for sale, offers in the teens |
|||
This user likes this post: |
05-11-2014, 02:07 PM | #28 | ||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Gee mate be careful doing that won't you, can do yourself an injury quite easily. Especially with the cheaper ones, and more especially if you start to get tired.
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
||
This user likes this post: |
05-11-2014, 02:50 PM | #29 | |||
When in doubt, GAS IT!!
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
|
Quote:
I cut up alot of old sleepers and they can blunt a chain in no time but to go through 5 chains a year you must be cutting wood day in and day out all year round.
__________________
. HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body MINE- AUII Forte Meteorite, dual fuel but otherwise bog stock. MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares . |
|||
05-11-2014, 03:41 PM | #30 | ||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Ti Tree is like concrete and also tends to bend when cutting it down and clearing areas which then stretched them etc too. Much harder work than just cutting up firewood.
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
||
Thread Tools | |
Display Modes | |
|