Genuine Ford Parts - Page 6

GTLEGEND · 11-02-2021, 11:43 PM

Quote:

Originally Posted by Linz

Hey GT, looking for a set of 4 dark charcoal/black cargo area tie down covers for the floor of a 2008-2010 BF3 wagon.

Hey Linz,

Can get, they are $11 each plus postage..

GT

**Linz** · 12-02-2021, 11:12 AM

Thanks GT, pm sent.

au2000 · 14-02-2021, 10:19 AM

Recently was able to pick up a set of PBR Tickford engraved calipers which we are going to fit onto the ST but we need to source the mounting brackets for these?

mcfly94 · 14-02-2021, 10:43 AM

Quote:

Originally Posted by au2000

Recently was able to pick up a set of PBR Tickford engraved calipers which we are going to fit onto the ST but we need to source the mounting brackets for these?

Message Nathan Vlotis on Club AU Facebook page, he’s got a CAD drawing for them and is willing so a run of billet brackets.

au2000 · 14-02-2021, 10:36 PM

Hi GT Legend,
Recently we picked up a set of PBR Tickford engraved calipers which we are going to fit onto the ST but we need to source the mounting brackets for these, have any spare or an idea of where to get them by any chance?

GTLEGEND · 14-02-2021, 10:48 PM

Quote:

Originally Posted by au2000

Hi GT Legend,
Recently we picked up a set of PBR Tickford engraved calipers which we are going to fit onto the ST but we need to source the mounting brackets for these, have any spare or an idea of where to get them by any chance?

Hi,

Definitely no longer available through Ford. Suggest try one of the below:

Fairford Spares: http://www.fairfordspares.com/home.aspx

Mr Ford: https://www.facebook.com/mrfordsparesptyltd/

Ford Pro: https://www.fordprowreckers.com.au/?...medium=organic

au2000 · 21-02-2021, 09:41 PM

Hi, just trying to find the mounting brackets for the pbr tickford calliper to suit a au? Anyone know who or where I may get some from?

Papa Smurf · 22-02-2021, 01:32 AM

TAU3 2B134 A and TAU3 2B135 A Maybe someone SOMEWHERE will have these? Maybe contact https://www.pbrbrakesusa.com/aboutus? Maybe they could give you a lead?

GTLEGEND · 22-02-2021, 07:03 AM

Quote:

Originally Posted by Papa Smurf

TAU3 2B134 A and TAU3 2B135 A Maybe someone SOMEWHERE will have these? Maybe contact https://www.pbrbrakesusa.com/aboutus? Maybe they could give you a lead?

I don't think that lead will get anywhere because I think Ford cast those brackets themselves at the Geelong Casting Plant so PBR would have had nothing to do with as Ford would have adapted the bracket to suit the caliper. Unless someone has NOS in their garage, then finding a wreckers or someone wrecking a car will be your only option.

tasdex · 22-02-2021, 03:04 PM

Any chances of a passengers side ba wind visor ,?

GTLEGEND · 24-02-2021, 07:53 AM

Quote:

Originally Posted by tasdex

Any chances of a passengers side ba wind visor ,?

Sorry mate long gone. Keep an eye out for part number ER18493A..I will too.

LPGUTE · 24-02-2021, 09:17 PM

Hi GT Legend,

how much for BF front wheel bearings and hub nuts?

GTLEGEND · 24-02-2021, 09:38 PM

Quote:

Originally Posted by LPGUTE

Hi GT Legend,

how much for BF front wheel bearings and hub nuts?

$140 each bearing/$35 each nut plus postage if required. They normally retail for $165/$44 each respectively.

LPGUTE · 24-02-2021, 09:41 PM

thank you I'll let you know

rare ss · 02-03-2021, 03:47 PM

Greetings, are you able to confirm the fuel filter p/n for an FG MKII F6?

went to fit a BG9155B but the one in the car is longer which I only assume is for more filter area

Cheers

GTLEGEND · 02-03-2021, 03:56 PM

Quote:

Originally Posted by rare ss

Greetings, are you able to confirm the fuel filter p/n for an FG MKII F6?

went to fit a BG9155B but the one in the car is longer which I only assume is for more filter area

Cheers

Original part number was BG9155A which was superseded by BG9155B, so you have the correct one. That is unless the one on the vehicle is aftermarket?

Pass on the VIN to confirm.

tasdex · 02-03-2021, 11:09 PM

Quote:

Originally Posted by GTLEGEND

Sorry mate long gone. Keep an eye out for part number ER18493A..I will too.

Bugger ,,
Cheers

**aussiblue** · 06-03-2021, 05:34 PM

Are Boot Lid sound insulation liners still available for the FG MKII and if so at what cost?

GTLEGEND · 06-03-2021, 06:50 PM

Quote:

Originally Posted by aussiblue

Are Boot Lid sound insulation liners still available for the FG MKII and if so at what cost?

If your are referring to the insulation like below, then yes. I can get for $120 + freight if required.

https://www.ebay.com.au/itm/Genuine-...cAAOSwRute6oQ8

**DJM83** · 07-03-2021, 08:37 AM

Ford logos to fit FG MkI lux pack centre caps still available?

GTLEGEND · 07-03-2021, 10:03 AM

Quote:

Originally Posted by DJM83

Ford logos to fit FG MkI lux pack centre caps still available?

You will need to be a bit more specific, I would need to see the wheel you are referring to or even better the part number on the back of the exact cap you are after as there are a few caps to chose from.

**DJM83** · 07-03-2021, 04:54 PM

Quote:

Originally Posted by GTLEGEND

You will need to be a bit more specific, I would need to see the wheel you are referring to or even better the part number on the back of the exact cap you are after as there are a few caps to chose from.

Yeah, I thought so.
Knew there was a cpl
These ones.

candlelarbra5212 · 07-03-2021, 07:32 PM

I need the black and chrome parts for around the windows of a 1009 FG G6ET. I can't find the parts anywhere and they were damaged and need to be replaced. Can anyone tell me what they are called or link parts? Sorry if this is not how it's done, new to the forum

GTLEGEND · 07-03-2021, 07:33 PM

Quote:

Originally Posted by DJM83

Yeah, I thought so.
Knew there was a cpl
These ones.
image

Cant tell from the image, are they 18's or 19's?

Even so there are still 3 different types of centre caps, pending on the leg length of the cap. Maybe a VIN could narrow it down, but really need the part number off the rear of the centre cap to 100% sure.

GTLEGEND · 07-03-2021, 07:39 PM

Quote:

Originally Posted by candlelarbra5212

I need the black and chrome parts for around the windows of a 1009 FG G6ET. I can't find the parts anywhere and they were damaged and need to be replaced. Can anyone tell me what they are called or link parts? Sorry if this is not how it's done, new to the forum

Are you referring to the top door mouldings as pictured below (the two at the bottom of the picture, the other is a roof moulding).

FG Side Window Mouldings.JPG

candlelarbra5212 · 07-03-2021, 07:45 PM

Quote:

Originally Posted by GTLEGEND

You used to be able to buy them separate and had a part number of BA18817A, but they are no longer available.

Will see if we can track a one down, will a good used one be ok?

Both, I need the parts for the chrome the whole way around and the black trim that sits in between the chrome and window at the bottom.

candlelarbra5212 · 07-03-2021, 07:56 PM

Quote:

Originally Posted by GTLEGEND

Are you referring to the top door mouldings as pictured below (the two at the bottom of the picture, the other is a roof moulding).

Attachment 104102

Need the trim around the whole window. Is it two parts?