|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
03-12-2005, 08:01 PM
|
#1 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
Well I started the conversion today.. I intend to space it out over a few weekends and keep the car driveable at the same time.
Today i removed and fitted the pedal sets. Probably the biggest job is all done now. Have the clutch cable just cable tied in the engine bay atm while I am still driving the car around, but it is a upside down jammed into the foot well job to fit it to the clutch cable to the pedal so I thought I'd tackle that today. Next weekend is centre console swap and fit the gearbox so in all its probably a 5 hours job to convert it. I will bridge the auto ecu to drive the car to Ford to get the new XR manual ECU matched to the BCM.. The pedal set it quite a straight forward swap, just remove the actual clutch pedal lever from the spigot and fit it back on after you have the brake and the brackets in place. If anyone wants a step by step 'how to' I can do that for them ..
__________________
|
||
|
|
| Thread Tools | |
| Display Modes | |
|
|
Manual Conversion underway :)
Threaded Mode