Molloy's XR6T build thread - Page 4

bcr2734 · 24-01-2009, 07:37 PM

i wish i built my motor this easy!

Molloy · 28-01-2009, 05:36 PM

Ok put the car back to the factory tune of 6psi and scored 211rwkw on the dyno today in the 31 degree heat, will get the print out of lance 2moz as the printer wasnt hooked up yet, Im happy with that as it shows the motor is healthy and not down on power in stock form

Molloy · 28-01-2009, 07:21 PM

Heres a pic, Im so happy with result as I was thinking it was going 2 get around 180-200rwkw

up next was my mate with a VY SS with a mafless tune, bigger TB, CAI, and full exhaust and he punched out 242, only 31kw higher then me, so I didnt think I went 2 bad in comparison

:
I would like to say a big thanks to lance for letting me have a go and not charging me for it,

Also today I was bored so I made this, so over being stuck inside with this leg
http://www.youtube.com/watch?v=bX8TWgjY3CI

nj351 · 29-01-2009, 07:45 PM

loser
what did you buy this week
some greats pics in there pitty there all turbo's

Molloy · 29-01-2009, 09:20 PM

Haha lol yeah didnt get anything this week, im back and forth with various tuners trying 2 see the best prices I can get, a good tune is cost $$$$
and still looking for a good cooler.

Cool_6 · 30-01-2009, 04:40 PM

i like boost, boost is nice when r we gonna see your machine doin skids :eclipsee_

Molloy · 30-01-2009, 05:23 PM

shes gonna be all types of sideways when the tunes done haha

thunderoo · 30-01-2009, 09:35 PM

Boost beats cubes....hahahaha.....heres one for the V8's. Cubes and boost. http://au.youtube.com/watch?v=ad7TtVnn6lE

Molloy · 31-01-2009, 08:00 AM

Lol yeah Ive seen that XR8 in real life, its a crazy peice of gear

yoda598 · 31-01-2009, 10:02 PM

Nice beast man, I didn't know taree had a dyno!! When'd they get it?

Molloy · 01-02-2009, 09:34 AM

Just last wensday

:

Molloy · 22-02-2009, 08:36 AM

Did a few things yesterday,

Ive found the cooler kit im gonna get so will place the order monday, and will take a few pics of the car once the new springs have settled

thunderoo · 22-02-2009, 07:42 PM

lower height or just a heavy duty standard height ?

Molloy · 22-02-2009, 08:06 PM

Lower height

Molloy · 14-03-2009, 11:40 AM

Ok update, went down to work this morning and fitted the Walbro GSS341 pump, took a little modification to get it into the pump cradle but I got it installed, you can really tell its a 500hp pump as its fair loud Lol, couldnt get any pics as my phones stuffed.

Also my 20% underdrive is for sale never been used will sell it for $100 (it was purchased for $250) with the belt 2 suit BA xt, to BF xt and xr6s reason for selling as over 400hp it will unbalance the motor, its more suited for a NA motor

deesun · 15-03-2009, 04:41 PM

^^^^ Question from the uninitiated' what does the underdrive do and how does it help increase HP. Sorry for the dumb question.

Molloy · 15-03-2009, 07:57 PM

Quote:

Originally Posted by deesun

^^^^ Question from the uninitiated' what does the underdrive do and how does it help increase HP. Sorry for the dumb question.

A smaller lighter Harmonic balancer, not as much load on the engine to spin it up compared to the heaver stock unit, thus frees up a lil engine load and gives u a lil power in this case up too 10kw.

deesun · 15-03-2009, 08:15 PM

How much would it cost to fit one? Or should I say how long does it take to fit. And is that all that has to be done or does it need a tune at the same time? Sorry should have asked this as well in 1st post.

Molloy · 16-03-2009, 01:46 PM

about a hour, no tune needed, as for cost will depend on the workshops rate depending on where u go.

deesun · 17-03-2009, 07:22 AM

^^^^^^ PM sent.

Molloy · 18-03-2009, 07:18 AM

Quote:

Originally Posted by deesun

^^^^^^ PM sent.

hey mate can u send that again my inbox keeps stuffing up

Molloy · 10-04-2009, 02:42 PM

Ok its been a while since the last update as Ive been flat chat, but this morning I was on the horn to Chris from Rapid performance and ordered some new go fast bits

My build is starting to take a different road after doing some more research but its all for the best.
Will slap up pics of my new bits soon

Molloy · 23-04-2009, 08:33 PM

Ok new bits

One Rapid performance FMIC, Pipes and under battery CAI

bcr2734 · 23-04-2009, 08:59 PM

Will they fit on a rover ride-on

. Just kidding. Looks good. You will need deep purple alloy polish with all this shiny stuff.

cheers

brian

Molloy · 23-04-2009, 09:15 PM

Lol, Just gotta bolt it all on now but wont have time for a few weeks, then Ive got a few LS1's and 2's and Bosses and clevos that need a good beat down

: (Sits back and waits for a bite)

bcr2734 · 24-04-2009, 01:31 PM

Quote:

Originally Posted by Molloy

Lol, Just gotta bolt it all on now but wont have time for a few weeks, then Ive got a few LS1's and 2's and Bosses and clevos that need a good beat down

: (Sits back and waits for a bite)

Wait until you get a big hook to drag me in fisherman. 99% of Clevo owners will bite without a hook

Rural 351 · 24-04-2009, 10:49 PM

Quote:

Originally Posted by Molloy

Lol, Just gotta bolt it all on now but wont have time for a few weeks, then Ive got a few LS1's and 2's and Bosses and clevos that need a good beat down

: (Sits back and waits for a bite)

Heres a bite "cubes out lasting boost since 1930" (of course I dont mean my cubes it could blow at any time)