Genuine Ford Parts

[GTLEGEND]

Originally Posted by gpierce

Thanks so much for this. I live in Eastwood NSW but work in Richmond. Not fussed too much where in Sydney. I love the drive anyway

PM me and we can organise a day/time/place for you to pick up.

[gpierce]

Originally Posted by GTLEGEND

See below, postage on top of course.

Fuel injector seals: Not available seperate from Ford, maybe injection place or the alike. You should be ok to just lube these before fitment, nothing usually goes wrong, but up to you.

Manifold to head seals: Available $20 each you need 8.

Top head connection seal: Available $7 each.

Lower head connection seal: Available $12 each.

Heater Pipe tube o rings: Available $40 each, you need 2.

Not sure if main O ring or seals come with water pump (I would assume so, but never assume, you know what that means). Just in case water pump main O ring is available and $14 each.

Hope that helps..

Thanks again, how about the HB3 bolts? In regards to above parts, yes I want all that let me know how to proceed

Not sure about the water pump yet. I might buy a Ford Performance one that has a bit more flow.

[GTLEGEND]

Originally Posted by gonads

Hi guys. I’m after the chrome GS badge from the rear right side boot lid of my FG. My local Ford dealer have been unable to help, so any hints would be greatly appreciated.

Thanks,
Ben

Hi Ben,

Is this what your chasing? Its actually a decal. This one is silver in colour as you had two options silver or black pending on body colour.

GS Boot Badge.jpg

GS Boot Badge 2.jpg

GT

[aussiblue]

What's the availability and price of new or perhaps even refurbished warrantied air bag clock spring for an Au Falcon at the moment?

[GTLEGEND]

Originally Posted by aussiblue

What's the availability and price of new or perhaps even refurbished warrantied air bag clock spring for an Au Falcon at the moment?

New Ford ones are long gone, not sure if there is anyone refurbishing them??

[aussiblue]

New Ford ones are long gone, not sure if there is anyone refurbishing them??

OK; thanks.

[Falconhell]

Hi GTL,
Would you please quote me on a full set of FG G6E chrome window strips.
Thanks

[GTLEGEND]

Originally Posted by Falconhell

Hi GTL,
Would you please quote me on a full set of FG G6E chrome window strips.
Thanks

Do you mean the ones along the bottom of the window (belt moulds) or the ones around the top of the doors or both?

[Falconhell]

All four tops ones, with an option to add the bottom ones.
Cheers

[GTLEGEND]

Originally Posted by Falconhell

All four tops ones, with an option to add the bottom ones.
Cheers

RHF Top Availble: $240
LHF Top Available: $140
RHR Top Available: $215
LHR Top Available: $200

RHF Outer Belt Mould Available: $150
LHF Outer Belt Mould Available: $190
RHR Outer Belt Mould Available: $185
LHR Outer Belt Mould Available: $165

Postage on top..

GT

[gonads]

Originally Posted by GTLEGEND

Hi Ben,

Is this what your chasing? Its actually a decal. This one is silver in colour as you had two options silver or black pending on body colour.

Attachment 106272

Attachment 106271

GT

Hi Legend. That’s not exactly the one I’m after. The boot lid decal on my model is chrome finished and approx 3-4mm thick. Unfortunately, my microfibre caught on the corner of the emblem and cracked/removed a small portion of it. I wouldn’t bother replacing it, but the factory paint has become slightly faded and the emblem has left a slight shadow.

If it’s the same size I might go with it. The rest of the FPV sticker set on my GS are silver, like the one you’ve posted

Thanks so much for checking this out for me.

Cheers,
Ben

[GTLEGEND]

Originally Posted by gonads

Hi Legend. That’s not exactly the one I’m after. The boot lid decal on my model is chrome finished and approx 3-4mm thick. Unfortunately, my microfibre caught on the corner of the emblem and cracked/removed a small portion of it. I wouldn’t bother replacing it, but the factory paint has become slightly faded and the emblem has left a slight shadow.

If it’s the same size I might go with it. The rest of the FPV sticker set on my GS are silver, like the one you’ve posted

Thanks so much for checking this out for me.

Cheers,
Ben

Hey Ben,

I may have found the chrome one, just waiting to get it. Leave it with me for a week or so and I'll get back to you again.

GT

[bondy99]

GTLEGEND,

Don't suppose you can get a rear dust cover that goes on the park brake lever on the rear of AU2 cheaper than the $47.00 or $48.00 from Jefferson Ford (includes postage cost)?

Thanks.

[GTLEGEND]

Originally Posted by bondy99

GTLEGEND,

Don't suppose you can get a rear dust cover that goes on the park brake lever on the rear of AU2 cheaper than the $47.00 or $48.00 from Jefferson Ford (includes postage cost)?

Thanks.

Best I can get is $40 plus postage..

[gonads]

Originally Posted by GTLEGEND

Hey Ben,

I may have found the chrome one, just waiting to get it. Leave it with me for a week or so and I'll get back to you again.

GT

Thanks GT! You’re nowhere near as much of a ***** as everyone keeps telling me. 👍😂 Seriously though, this community is so lucky to have an awesome service available to us.

While I’m at it, are you able to source a factory FGX XR6 Sprint rear ducktail-style spoiler? I’ve noticed fibreglass replicas out there but I’d really prefer a plastic one if available.

I’ve also hit you up a while ago when looking for a VCT solenoid for my AU SOHC. There was nothing available back then but I thought I’d check if anything has changed. It’s so devastating to have such a perfect old AU (still has factory clear coat in perfect condition as an indication) with an engine bay that looks like it just rolled of the production line, other than a dribble of oil gown the front of the donk. If you hear of one please let me know as it’s a part that’s worth a lot to me.

Thanks,
Ben

[GTLEGEND]

Originally Posted by gonads

Thanks GT! You’re nowhere near as much of a ***** as everyone keeps telling me. 👍😂 Seriously though, this community is so lucky to have an awesome service available to us.

While I’m at it, are you able to source a factory FGX XR6 Sprint rear ducktail-style spoiler? I’ve noticed fibreglass replicas out there but I’d really prefer a plastic one if available.

I’ve also hit you up a while ago when looking for a VCT solenoid for my AU SOHC. There was nothing available back then but I thought I’d check if anything has changed. It’s so devastating to have such a perfect old AU (still has factory clear coat in perfect condition as an indication) with an engine bay that looks like it just rolled of the production line, other than a dribble of oil gown the front of the donk. If you hear of one please let me know as it’s a part that’s worth a lot to me.

Thanks,
Ben

Hey Ben,

Yes I can source a genuine FGX Sprint rear spoiler, but they are not cheap at around $1600.

As for AU VCT solenoid, definetly none new, but might be able to source a second hand one. Can chase if you want me to.

GT

[blwneb]

Hi GT legend
after price for 2008 G6E turbo engine mounts both lh and rh i think same

[GTLEGEND]

Originally Posted by blwneb

Hi GT legend
after price for 2008 G6E turbo engine mounts both lh and rh i think same

Replied to your PM..

[GTLEGEND]

Originally Posted by gonads

Thanks GT! You’re nowhere near as much of a ***** as everyone keeps telling me. 👍😂 Seriously though, this community is so lucky to have an awesome service available to us.

While I’m at it, are you able to source a factory FGX XR6 Sprint rear ducktail-style spoiler? I’ve noticed fibreglass replicas out there but I’d really prefer a plastic one if available.

I’ve also hit you up a while ago when looking for a VCT solenoid for my AU SOHC. There was nothing available back then but I thought I’d check if anything has changed. It’s so devastating to have such a perfect old AU (still has factory clear coat in perfect condition as an indication) with an engine bay that looks like it just rolled of the production line, other than a dribble of oil gown the front of the donk. If you hear of one please let me know as it’s a part that’s worth a lot to me.

Thanks,
Ben

Hey Ben,

is this the one your after? Best I could get of the chrome finish as the rest is covered by the original label and I did not want to open a sealed bag. If so PM me.

GS.PNG

GS 2.PNG

[mchaggis]

Originally Posted by mchaggis

I'll give it a go. Thanks so much for following up. Will you PM bank details? How many are available? I may as well take 4 if I can.

Cheers.

Thanks GTLegend, the clips arrived and were a direct fit, and screwed into the existing "missing" floor mat lug.

Cheers.

[mchaggis]

Hi GTLegend,

I'm after the left hand front door actuator/latch. My door rattles and as there is no adjustment anywhere I might try and change out the latch.

EBay list them non-genuine, but I'd rather have the Ford part if it can still be found?

Also chasing the outer black B-Pillar trim for the same door?

Cheers

[GTLEGEND]

Originally Posted by mchaggis

Hi GTLegend,

I'm after the left hand front door actuator/latch. My door rattles and as there is no adjustment anywhere I might try and change out the latch.

EBay list them non-genuine, but I'd rather have the Ford part if it can still be found?

Also chasing the outer black B-Pillar trim for the same door?

Cheers

Hey mate,

Which car are you referring to?

[mchaggis]

Originally Posted by GTLEGEND

Hey mate,

Which car are you referring to?

BA2 Tornado, sorry should have mentioned that...

[GTLEGEND]

Originally Posted by mchaggis

BA2 Tornado, sorry should have mentioned that...

All good.

So LHF door latch is available no problem, $210. Pending on vehicle you may also need the wiring jumper loom as Ford changed the wiring connector on vehicles on 7/2002-2/2006 to the later style for parts. In other words vehicles built in that periord had a early style connector, for servicability the parts have a connector that was fitted to cars after this date and so to fit the later part to the earlier cars you need a jumper loom. Still available at $23.

LH door B pillar trim is obsolete, but I may be able to source you one. Need to check and confirm and get back to you. Let me know if you would like me to chase.

[gonads]

Originally Posted by GTLEGEND

Hey Ben,

is this the one your after? Best I could get of the chrome finish as the rest is covered by the original label and I did not want to open a sealed bag. If so PM me.

Attachment 106297

Attachment 106298

Bang on, mate! Let me know how to fix you up.

I might pass on the $1600 spoiler-wow!!! Definitely interested if you can find a secondhand VCT solenoid.

Thanks!

[GTLEGEND]

Originally Posted by gonads

Bang on, mate! Let me know how to fix you up.

I might pass on the $1600 spoiler-wow!!! Definitely interested if you can find a secondhand VCT solenoid.

Thanks!

For the badge, reply to my PM and we can organise.

I will put the feelers out for the VCT solenoid, will only be 2nd hand though.

[mchaggis]

Originally Posted by GTLEGEND

All good.

So LHF door latch is available no problem, $210. Pending on vehicle you may also need the wiring jumper loom as Ford changed the wiring connector on vehicles on 7/2002-2/2006 to the later style for parts. In other words vehicles built in that periord had a early style connector, for servicability the parts have a connector that was fitted to cars after this date and so to fit the later part to the earlier cars you need a jumper loom. Still available at $23.

LH door B pillar trim is obsolete, but I may be able to source you one. Need to check and confirm and get back to you. Let me know if you would like me to chase.

It's a July 2005 build, so I guess we need to include the loom. Take the time you need to source a B-Pillar trim and we can complete this in one go hopefully.

Thanks for your attention to detail!

[GTLEGEND]

Originally Posted by gonads

Bang on, mate! Let me know how to fix you up.

I might pass on the $1600 spoiler-wow!!! Definitely interested if you can find a secondhand VCT solenoid.

Thanks!

Update, I have managed to find a second hand VCT solenoid for AU, they are asking $300. If you are interested let me know via PM.

[aussiblue]

Any word on the supply of transmission coolers for the 6 speed FG and FGX per the discussion here: https://fordforums.com.au/showthread.php?t=11497204

[GTLEGEND]

Originally Posted by aussiblue

Any word on the supply of transmission coolers for the 6 speed FG and FGX per the discussion here: https://fordforums.com.au/showthread.php?t=11497204

Last I heard they were waiting on another batch to come in, but not sure how that is going. Would have to chase to see if I can find out any further information. Does anyone actually really need one right now because of failure? I don't think I have heard of FG2 or FGX having the same issue as the earlier vehicles of the cooler causing a milkshake. I believe that concern was fixed by FG2.