![]() |
|
![]() |
#1 | ||
Starter Motor
Join Date: Jan 2021
Posts: 3
|
My 2016 MD Mondeo Titanium Diesel with 67000 kms on the clock has intermittent problem with the auto engine on/off feature not restarting the engine. It usually happens before the engine has fully warmed up and always at a busy set of traffic lights. The engine will eventually restart via the ignition switch. Has anyone had this problem?
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,278
|
Just turn it off completely. The saving in fuel is not worth what it could cost in repairs.
Sent from my SM-S906E using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
Starter Motor
Join Date: Jan 2021
Posts: 3
|
How can I permanently disable the damn thing?
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Dec 2022
Posts: 132
|
Don't take this as gospel, but I don't think you can. AFAIK it's legally required as part of the emissions control. I can't access configuration settings on my Forscan because my free license period ran out, and because they're Russian, we can't send money to them to buy the full license. So I can't say for certain.
I've just gotten into the habit of switching it off when I release the handbrake. It's just like switch, switch, gear lever. Becomes quite automatic. But if you really want to disable it, search old threads. There's a link in one to a little electronic circuit you can make that will electronically "toggle" the switch every time you start up. So the default effectively becomes off. |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Diesel Sniffer
Join Date: Jun 2015
Location: Sydney
Posts: 1,372
|
As suggested, u will find a manual over ride button/switch in the centre console(near the handbrake lever when in the down position) i also believe it can be coded out(from memory it's in the bcm)
|
||
![]() |
![]() ![]() |