OED666 convincingly in the 13s! - Page 3

1TUFFUTE · 07-08-2006, 03:03 PM

Quote:

Originally Posted by OED666

engine, cam and tune - $2000 (tuning so expensive due to problems finding out what was wrong)

clutch and flywheel i think under $500

apart from normal exhaust stuff, i also did buy a new diff in jan, but same ratio as i previously had. i only got a new diff cuz the centre in the other one was not for short diff gears.

tyres... well they are the same ones i have had for nearly 2 years... just normal 17's. $135 each...

Awesome...with the money u saved you can afford to burn more fuel now :hihi: You headin to the dyno day at redclifff on sat?

Walkinshaw · 07-08-2006, 03:10 PM

Quote:

Originally Posted by OED666

clutch and flywheel i think under $500

That's cheeeeeeeeeeeeeep isnt it? My 4.0 organic is arround $300. I would have thought a turbo flywheel would be $500+ on its own.

OED666 · 07-08-2006, 04:03 PM

yea, it was cheap...

i think the flywheel was $170, so if you ever see one for sale, grab it with both hands!!!

it revs so much faster than the old one. there is no way in hell that i can pick a consistant point to change gears at, it swings the tacho very quickly

and about saturday... i need to get a new belt. i am also thinking of getting an xh belt tensioner while i am at it.

but i will be there on saturday

blueoval · 07-08-2006, 04:30 PM

hmmm, me thinking cheap future project.

again, well done dude.

BOOSTDEF · 07-08-2006, 04:49 PM

If your running the EF belt setup ive got one at home if you need it?

Yeh but the AU ones are $33 from repco.

What flywheel did you use? from an xr6T? Do the stall converters match up with those?

Rollin · 07-08-2006, 08:37 PM

Autos use flex plates, not flywheels...I don't think a BA flexplate would fit an e-series, and even if it did i on't know if there would be any benifit.

OED666 · 07-08-2006, 08:49 PM

thanks, but i am going to get an xh tensioner, and belt to suit.

hopefully should have it all sorted by friday night, so i can go to the rdp dyno day on saturday

gozza · 08-08-2006, 09:42 AM

good work paul

Bipolar · 08-08-2006, 01:26 PM

Congrats mate! Had I not been preoccupied I would've replied sooner. You were so close last time I was convinced you could pull off. Great work! I wish I was there to film it this time! Did anyone else?

OED666 · 08-08-2006, 01:48 PM

yea, a friends gf's friend video'ed it... i am waiting for it... and its hard waiting... :(

i saw you driving at everton hills when i was on my way out

dansedgli · 08-08-2006, 01:56 PM

Great job mate!

OED666 · 08-08-2006, 02:26 PM

oh, and i remember ages ago, when Rollin and i were in teh 14's.. we had in our sig,

"welcome to the 14 second club." "thanks, but i am just passing through."

well, its finally happened...

Rollin · 08-08-2006, 07:19 PM

"Welcome to the 14 second club Sir, would you like to become a member?"

"No thanks, I'm just passing through

"

Should we now change that to "Welcome to the 13 second club Sir..." ?

I was searcing for a thread on a different topic before, when I came across this one:

hxxp://www.fordforums.com.au/showthr...ghlight=ported

And I found this post:

Quote:

Originally Posted by Rollin

OED i reckon it you ported the buggery out of your head, went 3" zorst, got an even bigger cam (hehehe....) retune, got all the misc 'stuff' out of your car that you insist on driving around with, and let me drive you could maybe do a 13.99 or 14.00.

cant wait to get to the drags, in either of our cars...

Oh ye of little faith! 13 in straight street trim! Aim for 12s mate, you know a good mechanic to help you get there ;)

Grechie · 08-08-2006, 07:37 PM

OED666 your car is my car's new idol, u lucky SOB i swear, only time ill get close to that is if i bolt on a hair dryer

BI6TIM · 08-08-2006, 09:55 PM

Rubish, hair dryers are too easy, do it N/A.

By the way Paul, i forgot to say so far, good work brother. I did not see that coming. It's pure craziness, stock bottom end and head. Are you sure you didn't forget about that 25hp shot of Nitrous?

OED666 · 08-08-2006, 10:13 PM

yea, sorry... forgot to mention about the bottle... :P

i am just looking forward to more qld'ers to join me... its lonely...

vegabass · 08-08-2006, 10:27 PM

Quote:

Originally Posted by OED666

yea, sorry... forgot to mention about the bottle... :P

i am just looking forward to more qld'ers to join me... its lonely...

Ill follow you Paul! Im hungry for a 13 sec run. although ill be useing bits that you guys might snob off. yes ill be upgrading to a bigger dev cam.

but before that ill be fixing my LSD.

:

old_mate · 08-08-2006, 10:36 PM

lol

i keep seeing that mob on ebay with AU donks buy it now for 600

they'll mod the sump and not touch the k frame

head on down to sure cam, get something big. Run a chiptorque/eseries flash/edit/chiptorque copy thingo and cross everything the T5, tailshaft and diff hold up. I wont have 4.11 but would be interesting to see if i could nut a mid 14

or

save up and build the XY. Blow you all into the weeeeeeeeeeds

BI6TIM · 08-08-2006, 11:04 PM

Quote:

Originally Posted by vegabass

although ill be useing bits that you guys might snob off. yes ill be upgrading to a bigger dev cam.

Why would you, I mean I know you seem to like his stuff, but is Pauls time not enough proof that JMM parts are not necissarily the business?

Rollin · 08-08-2006, 11:43 PM

Surecam FTW!!!!

FPVWEPN · 09-08-2006, 01:10 AM

Quote:

Originally Posted by BI6TIM

Why would you, I mean I know you seem to like his stuff, but is Pauls time not enough proof that JMM parts are not necissarily the business?

Wrong just because oed666 ran a fantastic time on non-jmm products it doesn't mean that they aren't the business there are plenty of quick jmm equipt cars out theere

EFFalcon · 09-08-2006, 01:16 AM

i think its safe to say that there are multiple ways to pull 13's
JMM has proven their way is one way.

time to get serious and get some slicks ey ;)

Rmyers · 09-08-2006, 02:52 AM

That is such an impressive time. Makes me wanna chuck an AU engine into the ED.........(slaps self)..... "One project at a time" :P

mcflux · 09-08-2006, 09:41 AM

Quote:

Originally Posted by Rmyers

That is such an impressive time. Makes me wanna chuck an AU engine into the ED.........(slaps self)..... "One project at a time" :P

Pimpin' ain't easy...

Bipolar · 09-08-2006, 11:41 AM

Quote:

Originally Posted by OED666

yea, a friends gf's friend video'ed it... i am waiting for it... and its hard waiting... :(

i saw you driving at everton hills when i was on my way out

I thought that was you! I didn't get a good enough look but was convinced when you flew off into the distance.

OED666 · 09-08-2006, 12:25 PM

that was just after this silly scrag who wasnt looking where she was going nearly hit me when she changed lanes... we both stopped at the lights, and she thought she was cool, and was laughing... STUPID ***** ******** ******

I showed her my disgust, in my own creative way!!!

| |
| |
| |
| |
/ /
\ \

Bipolar · 09-08-2006, 12:34 PM

Heh heh. Yyeah

That happened to me the same night. This guy in a (roudabout) 95 626 with a zorst and big rims was trying to impress the chick in the passenger seat (my gf said "You can't let him beat you"). Didn't even load 'er up and my stocka smoked 'im. Twice. Amuzing, legal entertainment on an otherwise average drive :Reverend:

EB Pete · 09-08-2006, 01:02 PM

Quote:

Originally Posted by OED666

yea, sorry... forgot to mention about the bottle... :P

i am just looking forward to more qld'ers to join me... its lonely...

i'm coming. jsut gotta get that surecam cam happening.

Walkinshaw · 09-08-2006, 04:37 PM

Quote:

Originally Posted by OED666

I showed her my disgust, in my own creative way!!!

| |
| |
| |
| |
/ /
\ \

Thats no way to get a good 60' !

BI6TIM · 09-08-2006, 07:30 PM

Good 60foot times are only for the track. Any where else that diagram show the way it should be done.