Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Ford Coupe Club of Australia > General Discussions

Reply
 
Thread Tools Display Modes
Old 04-12-2023, 09:50 AM   #1
zoesgift
FF.Com.Au Hardcore
 
Join Date: May 2010
Posts: 1,875
Smile Re: Cobra build no's

does anyone know if cobra 100 exists? original owner has surname of Lutsi
zoesgift is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2023, 08:22 AM   #2
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,755
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: Cobra build no's

Quote:
Originally Posted by Jet _Black View Post
image


this is the (unfortunately numbered) Cobra 186
The car was loaded with everything good 351 ps , air , steer , leather race seat in the front , 4 speed & a 3.55 rear diff. Photo from the very late 1980's

had very low km ~ 25k's on it & was a pleasure to drive

Now owned by someone else , I hope they are taking good care of it.



JB
That looks like the old Baulkham Hills Council Chambers?
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Old 09-12-2023, 08:23 PM   #3
Jet _Black
Starter Motor
 
Jet _Black's Avatar
 
Join Date: Dec 2020
Location: Lake Macquarie
Posts: 3
Default Re: Cobra build no's

fortunately they were closed when we dropped by. ;)
__________________
Lookout Racing YouTube
Jet _Black is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2011, 08:34 PM   #4
King Neptune
Regular Member
 
King Neptune's Avatar
 
Join Date: May 2008
Location: Vic
Posts: 192
Default

I went to Hanging Rock car show 2 weeks ago & saw No's 230 & 385. I took photos, if I can get them off my camera I will post them up.
Cheers Rob.
King Neptune is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2011, 08:01 PM   #5
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,840
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: Cobra build no's

Quote:
Originally Posted by King Neptune
I went to Hanging Rock car show 2 weeks ago & saw No's 230 & 385. I took photos, if I can get them off my camera I will post them up.
Cheers Rob.
Hey Rob

Just met the owner of Cobra 385 today!

George
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2011, 10:08 PM   #6
gtxb67
moderator ford coupe club
 
gtxb67's Avatar
 
Join Date: Jun 2007
Posts: 6,640
Default

moff donated the 77 bathurst winner to the bathurst museum. for sandown 78, it was painted in cobra colours and given the horizontal repeaters on the quarter panels (bonds car kept the vertical repeaters). it was then painted in the federation colours and later restored back to the 77 colours - still with the horizontal repeaters though
gtxb67 is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2011, 10:48 PM   #7
XC GXL
FF.Com.Au Hardcore
 
XC GXL's Avatar
 
Join Date: Jul 2006
Location: Derbyshire/Shropshire, UK
Posts: 1,419
Default

Quote:
Originally Posted by gtxb67
moff donated the 77 bathurst winner to the bathurst museum. for sandown 78, it was painted in cobra colours and given the horizontal repeaters on the quarter panels (bonds car kept the vertical repeaters). it was then painted in the federation colours and later restored back to the 77 colours - still with the horizontal repeaters though


Quote:
Originally Posted by Uncle Raggy
Pretty sure the car at the museum that won in 1977 is actually an XB with updated sheet metal and dash. This thread might hold the answer, but since Baby Preecey has just started waking up I don't have time to read it myself. Nappies to change lol --->http://www.fordforums.com.au/showthr...ht=race+coupes


Thanks for the replies.
I thought that it was the '77 winner XB with an XC update but wasn't sure.
What threw me was the horizontal rear quarter lights and the XC dash as that is a fair bit of work for asthetics especially in racing.
I knew that I read it somewhere but it didn't seem to add up (to me anyway).

Thanks

Wayne
XC GXL is offline   Reply With Quote Multi-Quote with this Post
Old 24-02-2011, 02:38 PM   #8
FPV-HSV
previously SMIKXR6
 
FPV-HSV's Avatar
 
Join Date: Feb 2010
Location: Sydney NSW
Posts: 772
Default

what happend to cobra 002 does any one have info or pics
FPV-HSV is offline   Reply With Quote Multi-Quote with this Post
Old 03-08-2011, 08:09 PM   #9
jtcooke
Starter Motor
 
Join Date: Aug 2011
Posts: 5
Default Re: Cobra build no's

Quote:
Originally Posted by 351v8fords
what happend to cobra 002 does any one have info or pics
We own 002, we purchased it in Townsville in about 1985 and have had it ever since.
Attached Images
File Type: jpg DSC04855.jpg (112.9 KB, 200 views)
jtcooke is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-08-2011, 08:26 PM   #10
Scooter
FF.Com.Au Hardcore
 
Scooter's Avatar
 
Join Date: Jan 2009
Location: Perth
Posts: 1,633
Default Re: Cobra build no's

Quote:
Originally Posted by jtcooke
We own 002, we purchased it in Townsville in about 1985 and have had it ever since.
Bloody lucky buggers!
Scooter is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2011, 02:30 PM   #11
FPV-HSV
previously SMIKXR6
 
FPV-HSV's Avatar
 
Join Date: Feb 2010
Location: Sydney NSW
Posts: 772
Default Re: Cobra build no's

Quote:
Originally Posted by jtcooke
We own 002, we purchased it in Townsville in about 1985 and have had it ever since.
Hey mate looks great. That car was a damaged bare shell the petrol tank and all underneath was colour coded roof was damaged no diff and the engine block was sitting on the floor. It was on top of a shipping container in sydney west in the 80s my dad said he could of brought it very cheap but it had major damage like it had been rolled any other pics cheers Travis.
FPV-HSV is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2011, 05:51 PM   #12
Gavin Thomas
* 1973 ZF Fairlane 500 *
 
Gavin Thomas's Avatar
 
Join Date: Sep 2009
Location: Top End N.T.
Posts: 944
Default Re: Cobra build no's

So as per one of the posts in this great thread - can anyone confirm if the windback sun roof was actually factory fitted to any genuine XC Cobra's ?
Gavin Thomas is offline   Reply With Quote Multi-Quote with this Post
Old 23-05-2012, 01:19 PM   #13
jtcooke
Starter Motor
 
Join Date: Aug 2011
Posts: 5
Default Re: Cobra build no's

Quote:
Originally Posted by XWGT6
Hey mate looks great. That car was a damaged bare shell the petrol tank and all underneath was colour coded roof was damaged no diff and the engine block was sitting on the floor. It was on top of a shipping container in sydney west in the 80s my dad said he could of brought it very cheap but it had major damage like it had been rolled any other pics cheers Travis.
This is the info that we have about 002 from a reliable source...Keith Goodall owned Cobra 002 from new. Keith was a Qld Rally Driver, he also owned the GTHO phase IV that Bowdens now have http://www.gtho4.com/fouronthefloor/...r-archive.html












--------------------------------------------------------------------------------------------------




Hi Cookie, I have photos of the Cobra just after my Dad clobbered thehorse.










David Price
--------------------------------------------------------------------------------------
Posted 441 days ago

"Cookie" my dad is Dave Price Crash Repairs. I remember thecar in the workshop after it had hit the horse, which from memory happened nearthe stuart drive-in. He may have other details if your interested etc....
Regards
Dave








--------------------------------------------------------------------------------------


Lendi

Posted 807 days ago

Hi Doug I saw #002 yesterday at Maroochydore FPV. They had a GT Day withAllan Moffat as guest speaker. It had been restored back to original condition.They also had the GTHO Phase I,II,III & IV Race cars. It was amazing tosee. . I think FPV will be doing these days around Australia so hopefully theywill bring these cars with them for you to see.
--------------------------------------------------------------------------------------
Doug Cox

Posted 847 days ago

Funny that. #002 was actually the first Bathurst model, the 30 runningfrom #002 to #031. #001 was a 'standard' model.
I remember seeing #002 a couple of times, about 1980, first in Dave Price CrashRepairs getting a new roof after hitting a horse near Giru. Took the roof offclean as a whistle.
Saw it later, I think it was owned by an army bloke at the time, seemed to havebeen lowered, had mega-buck, ultra wide wheels with very expensive low-profilePirellis and was fitted with a roll cage.
Dunno where it is now...








--------------------------------------------------------------------------------------
Tony Christensen

Posted 1391 days ago
As an apprentice when thexc Cobras came out I did the pre delivery inspection on #002 that had beenbought by Keith Goodall. The anti tramp rod was not fitted and was lying in theboot , when we tried to fit it the U bolts would not straddle the rod end.There was a transmission cooler but no pump . I thought Keith would 'hit theroof'', but he told me he wasn't worried but just told me to keep all thefactory documentation that was scattered. The anti tramp rod was not fitted and was lying in theboot , when we tried to fit it the U bolts would not straddle the rod end.There was a transmission cooler but no pump . I thought Keith would 'hit theroof'', but he told me he wasn't worried but just told me to keep all thefactory documentation that was scattered
















Last edited by jtcooke; 23-05-2012 at 01:26 PM.
jtcooke is offline   Reply With Quote Multi-Quote with this Post
Old 24-02-2011, 06:22 PM   #14
ZcAmbo
Regular Member
 
Join Date: Jun 2010
Posts: 211
Default

There was only one genuine numbered cobra that raced at bathurst that was number 221 was painted up white with red stripe's was featured in a issue of australian muscle cars
ZcAmbo is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2011, 09:20 PM   #15
CJR09
RPO 77
 
CJR09's Avatar
 
Join Date: Feb 2006
Posts: 1,952
Default

Quote:
Originally Posted by ZcAmbo
There was only one genuine numbered cobra that raced at bathurst that was number 221 was painted up white with red stripe's was featured in a issue of australian muscle cars


wasnt it involved in a smash up of some sort - dont think it was on the track though??? stolen?

looked quite cool in the white/red
__________________


Q: If you have tried to sell it three times now and it is still not sold, do you think it might be over-priced?

A: It is over priced - just like all the other falcon coupes for sale!!

CJR09 is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2011, 08:37 PM   #16
paulauxr8
Starter Motor
 
Join Date: Feb 2006
Posts: 5
Default

Hi smally351,

It must have been number 25 you had at your work shop, number 27 has been in Brisbane since 1978 owned by my uncle, he purchased it from a Ford dealer in Brisbane after it was used as one marshals car at Bathurst in 78.
No 48 and 369 are also owned by members of my family.
Regards Paul
paulauxr8 is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2011, 10:19 PM   #17
smally289
growing up is optional
 
smally289's Avatar
 
Join Date: Feb 2006
Location: Gawler area SA
Posts: 3,303
Default

Quote:
Originally Posted by paulauxr8
Hi smally351,

It must have been number 25 you had at your work shop, number 27 has been in Brisbane since 1978 owned by my uncle, he purchased it from a Ford dealer in Brisbane after it was used as one marshals car at Bathurst in 78.
No 48 and 369 are also owned by members of my family.
Regards Paul
I cannot remember exactly what number it was, could have been 25, I know it was 20 something!
smally289 is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2011, 08:27 AM   #18
66GT
Regular Member
 
Join Date: Jun 2010
Posts: 327
Default

Quote:
Originally Posted by paulauxr8
Hi smally351,

It must have been number 25 you had at your work shop, number 27 has been in Brisbane since 1978 owned by my uncle, he purchased it from a Ford dealer in Brisbane after it was used as one marshals car at Bathurst in 78.
No 48 and 369 are also owned by members of my family.
Regards Paul
Hey Paul, is your uncle's no. 27 the official cobra Bathurst pace car with all the original paint & stickers etc. If so, I was talking to him at the Toowoomba swap meet - 1 very unique cool cobra.
66GT is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2011, 10:37 PM   #19
paulauxr8
Starter Motor
 
Join Date: Feb 2006
Posts: 5
Default Re: Cobra build no's

Quote:
Originally Posted by 66GT
Hey Paul, is your uncle's no. 27 the official cobra Bathurst pace car with all the original paint & stickers etc. If so, I was talking to him at the Toowoomba swap meet - 1 very unique cool cobra.
Hi 66GT,
That is my uncles car, the paint is original but the stickers were put back on a few years ago back to the original specs, my uncles says it was the pace car but there were more than one used as marhals cars that week end so that is up for debate as the owners of the other cobras used that weekend will argue there car was the official pace car ??
cheers Paul
paulauxr8 is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2011, 10:11 PM   #20
ZcAmbo
Regular Member
 
Join Date: Jun 2010
Posts: 211
Default

it was orinally rolled then purchased repaired then raced cant rember which issue of amc its in but like i said its the only genuine falcon cobra raced at bathurst its still owned by the watson family if i recall currently under restoration back to original cobra spec.
The driver who raced the car is also building a replica of this cobra he kept all the stickers of the car when they retired it from racing to give back to the watson family.
ZcAmbo is offline   Reply With Quote Multi-Quote with this Post
Old 12-03-2011, 08:53 PM   #21
Pinkbits
FF.Com.Au Hardcore
 
Pinkbits's Avatar
 
Join Date: May 2005
Location: In my shed
Posts: 5,066
Default

Met a bloke in my suburb who owns No 313 but now a 351.
Has owned it since 1982 and has just clocked up 120k.
Pinkbits is offline   Reply With Quote Multi-Quote with this Post
Old 15-03-2011, 10:40 PM   #22
fords35to75
No plastic bumpers
 
Join Date: Nov 2009
Location: Magpie (near Ballarat) Vic
Posts: 38
Default Re: Cobra build no's

I know of three in Ballarat area. Not sure of the numbers of any of them but one was allegedly bought out of an old guy's shed about 18 months ago. The guy that has it now reckons it hadn't moved in over 20 years but in real good condition. And if i mentioned what he told me he paid for it we would all cry (I am). I'll see if i can suss out any numbers
fords35to75 is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 12:41 AM   #23
cobreta
Regular Member
 
cobreta's Avatar
 
Join Date: Nov 2006
Location: Perth WA
Posts: 58
Default Re: Cobra build no's

Cobra number 340 has appeared on eBay

http://cgi.ebay.com.au/GENIUNE-Ford-...0#ht_929wt_689
cobreta is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 12:47 AM   #24
UU TS50
T3 TS50 075
 
UU TS50's Avatar
 
Join Date: Nov 2007
Location: Perth
Posts: 1,146
Default Re: Cobra build no's

Quote:
Originally Posted by cobreta
Cobra number 340 has appeared on eBay

http://cgi.ebay.com.au/GENIUNE-Ford-...0#ht_929wt_689
Needs more than 10k spent on it as the seller says that it needs and whats with the seats as the trim is far from right.
__________________
Cheers John

My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph TS 50 = 237.1 rwkw
UU TS50 is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 01:16 AM   #25
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: Cobra build no's

Quote:
Originally Posted by Congo XR8
whats with the seats as the trim is far from right.
It almost looks like material from an XD/XE Falcon.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 01:42 AM   #26
Belial
Clevo Mafia Muscle Man
 
Belial's Avatar
 
Join Date: Dec 2006
Location: Melb's West!
Posts: 1,705
Default Re: Cobra build no's

Johnny the "nut job" from Aussie Coupes has generated a coupe registry and it has 6 listed Cobra's with all their build detail.

....by nut job I mean coupe freak.... well, he does run the Aussie Coupe site!!
__________________
Toy
XB GS 351 Manual Sedan (The "Pig")

Daily
FPV GS Manual Sedan. (1 of 20)
now 360rwhp thanx to Blue Power Racing
"Global warming..." " I'm doing my part!"

Also a member of the Clevo Mafia.
You hit me, we hit you!
&
Metal Jacket Muscle Car Club
Belial is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 11:37 AM   #27
brut33
Regular Member
 
brut33's Avatar
 
Join Date: Sep 2007
Posts: 111
Default Re: Cobra build no's

Cobra 340 was sold July 2010 I did speak with the new owner at the time, it doesn't look any different now than it did then. Seat material is extremley hard to get these day's the company that did the last 3 runs went into liquidation one month after the last run so that's the end of that source.
brut33 is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 11:42 AM   #28
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,840
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: Cobra build no's

are you saying global trim went into liquidation?

http://www.globaltrim.com.au/

They were releasing some shortly

The owner is on AFF under user name trimmaster
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 02:27 PM   #29
brut33
Regular Member
 
brut33's Avatar
 
Join Date: Sep 2007
Posts: 111
Default Re: Cobra build no's

[QUOTE=gcg2503]are you saying global trim went into liquidation?

NO it was another company that did the 3 previous production runs.
brut33 is offline   Reply With Quote Multi-Quote with this Post
Old 06-06-2011, 07:46 PM   #30
trimmaster
Ford Trim Specialist
 
trimmaster's Avatar
 
Join Date: Nov 2005
Location: Victoria
Posts: 162
Default Re: Cobra build no's

Hey guys just came across this, we certainly are still in business and have cobra material coming, just taking a little longer than hoped but it is going to happen.
Just like the XD/XE ESP and XC HOUNDSTOOTH materials we have reproduced, our Cobra trim will be hard to pick from original.


Quote:
Originally Posted by gcg2503
are you saying global trim went into liquidation?

http://www.globaltrim.com.au/

They were releasing some shortly

The owner is on AFF under user name trimmaster
__________________
FORD Trim Master
trimmaster is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 03:20 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL