|
|
|
|
|
|
|||||||
| Shockworks Ford damper specialist located in Melbourne's S.E suburbs. Website Link |
 |
|
|
Thread Tools | Display Modes |
|
|
23-06-2013, 05:27 PM
|
#1 | ||
|
Call me dirt... Joe Dirt
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
|
Ah, so the rear dampers are internally adjustable?
You need to take off the top mount bolt and turn the body of the damper in order to adjust? Thanks. Joe.
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100 Mods so far: Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines Mods to come: 4.11 Diff Gears|Chromoly Tailshaft I use & recommend: Castrol|Motorcraft|Mainlube|Penrite Check Out My Build Thread |
||
|
|
|
23-06-2013, 05:31 PM
|
#2 | ||
|
Regular Member
Join Date: Jan 2013
Posts: 304
|
Ha Ha They are not Koni's mate!! We have an adjuster knob under the top mount that you can just turn to make the damping force change so takes about 3 seconds a damper. No need to remove or unbolt, can be played with when installed.
Cheers |
||
|
|
|
| This user likes this post: |
|
23-06-2013, 05:36 PM
|
#3 | |||
|
Call me dirt... Joe Dirt
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
|
Quote:
I thought that was it, but I couldn't make it out from the photos of the damper. So who could I approach to get these set up in WA? Joe.
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100 Mods so far: Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines Mods to come: 4.11 Diff Gears|Chromoly Tailshaft I use & recommend: Castrol|Motorcraft|Mainlube|Penrite Check Out My Build Thread |
|||
|
|
|
|
23-06-2013, 05:51 PM
|
#4 | ||
|
Regular Member
Join Date: Jan 2013
Posts: 304
|
We have not had the chance to talk to any dealers yet in WA, but takes about ten minutes to fit to the rear and off you go.
if you know any good reputable places we should contact, let us know. All our time currently is in development and tuning lately so need to find some good people in the states other than Vic. The dampers are $699 for the pair and are fully rebuildable at a cost of $80 each and have a 12 months warranty which includes any track use. They are a big bore montubes, proven to be very robust and tuned for some serious bumpy roads we have in Australia. Cheers |
||
|
|
|
Re: Ford Falcon BA-FG Coilovers
Hybrid Mode