|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
26-02-2023, 01:22 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2022
Posts: 4
|
Hi
First post  New to site and sorry if this has been covered already. I had a thermostat housing with new thermostat replaced 2 years ago. Its has done 2000 km since then with no problems as the car is not a daily drive. So recently the car after 10 minutes of running then suddenly unloads a lot of coolant with the temp gauge reading normal with no external leaks other then the tank. I have pressure tested the system that passed and have used a bottle on the expansion tank to help bleed. I can hear a sorta vacum leak under the alternator. Is it possible that the pump or thermo housing is suckin air ? Big thank you for any response |
||
|
|
2006 Fiesta Duratec spewing coolant
Threaded Mode