![]() |
|
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 1,042
|
As the topic says, I just degreased the engine (got damn they are beautiful when they are degreased), and noticed that once I started the car up, and reconnected the VCT connector, it instantly got coated in oil again.
Is this normal, or should I be worried... because I'm a bit worried at the moment :/ |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
No oil should leak from the VCT solenoid connector, you will have to replace the solenoid. It's not that uncommon for them to leak from there.
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 1,042
|
That was damn quick. Thanks for that I will hunt for prices tommorow
![]() |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Racing improves the breed
Join Date: Apr 2006
Location: SE Melbourne
Posts: 3,981
|
I had the same thing happen to mine not long ago, VCT solenoid needs to be replaced
__________________
1970 Mini Cooper S Historic Group Nc Touring car 1964 Mini Cooper S Historic Group Nb Touring car Victorian Hill Climb Championship |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,216
|
What amount of KM's do the VCT solenoids start to leak? And how much do they cost?
cheers Bill.
__________________
AUII XR6 VCT ute 20 years and still going strong! |
||
![]() |
![]() ![]() |
![]() |
#6 | |||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 1,042
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#7 | ||
Racing improves the breed
Join Date: Apr 2006
Location: SE Melbourne
Posts: 3,981
|
Mine started leaking at 120,000kms
__________________
1970 Mini Cooper S Historic Group Nc Touring car 1964 Mini Cooper S Historic Group Nb Touring car Victorian Hill Climb Championship |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
hmmm never heard of vct connector leaking....mine was leaking on the pas side....ended up being the banjo washers...needed 2 of up top....cost me like 4 or 5 bucks each...no leak since
|
||
![]() |
![]() ![]() |
![]() |
#9 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,761
|
is it hard to change, and is there a performance loss if its a small leak? oh how much??
__________________
Build Thread: BA XR8 with all the goodies. fordforums.com.au/showthread.php?t=11247663 |
||
![]() |
![]() ![]() |
![]() |
#10 | ||
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
dont think there are any loses..mine was leaking for a month or two....it cost me bout 5 bucks...u just undo the bolt on the pas side of vct and swap over the nuts to where the ones are now....u may get small leak of oil while changing washes
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Banned
Join Date: Jan 2005
Location: Qld Moderator
Posts: 3,731
|
They are a fews hundred bucks.
|
||
![]() |
![]() ![]() |
![]() |
#12 | ||||
That's Numberwang!!!
Join Date: Feb 2006
Location: Hoppers Crossing, Vic
Posts: 99
|
Quote:
Mine is leaking now and I've been told its $240-ish to get a new VCT solinoid from Ford. And no-one else makes them, I've tried. BTW, mines been leaking since about 115'000kms
__________________
www.aufalcon.com.au/only1 FAIRMONT GHIA: SO GOOD, THEY NAMED THEY NEW FALCON AFTER 'EM Quote:
|
||||
![]() |
![]() ![]() |
![]() |
#13 | ||
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
yeh well would cost u that for the whole solinoid....sorry just read mine was leaking from the piping on passenger side....banjo bolt and washers were gone
|
||
![]() |
![]() ![]() |