|
|
|
|
|
03-01-2011, 02:13 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2010
Posts: 2
|
Has any one had a BA turbo idle at 1400 rpm and wont go below
|
||
|
|
03-01-2011, 06:37 PM
|
#2 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 322
|
Chances are its got an air leak on the inlet side most probably from a broken pcv valve or being a trbo possibly a split or loose intake gasket, these are the basics, an electronic issue may be present too, although usually if the throttle body/accellerator pedal system has an issue, it will bring on the engine light and switch to a `guard mode` with limited throttle control. They are common for broken PCV valves, theyre pushed into a grommet at the rear of the rocker cover, but it may have blown the pcv pipe off under the throttle body, have a good look/listen around the throttle with the engine running you`ll probably hear it hissing its tits off.
__________________
XC GXL Warm 351c AOD  09 VE SV6 Sportwagon  BA Fairmont Ghia 
|
||
|
|
|
03-01-2011, 07:01 PM
|
#3 | ||
|
Clevo Mafia Inc.
 
Join Date: Dec 2004
Location: Melbourne
Posts: 10,496
 
|
|
||
|
|
Hi Idle in BA
Linear Mode
