2008 Ford Focus LT 2.0L PCV Valve

[Unknown1]

Anyone taken on the task of replacing a PCV valve on an 08 focus 2.0L Duratec engine?

Took my throttle body off today to clean it due to idel issues & was surprised to see what i saw- The throttle body was thick on the inside with engine oil. Upon looking into the intake manifold i literally have a puddle of engine oil in there.

I am looking to remove the intake manifold, replace the gaskets and the PCV Valve although struggling to find some where to buy the valve from.

Im not sure if the US model focus use the same valve as the Japanese/ Australian model vehicles.

Anyone have to purchase this before in AUS, or would going to ford be my best bet?

[Unknown1]

Anyone taken on the task of replacing a PCV value on an 08 focus 2.0L Duratec engine?

Took my throttle body off today to clean it due to idel issues & was surprised to see what i saw- The throttle body was thick on the inside with engine oil. Upon looking into the intake manifold i literally have a puddle of engine oil in there.

I am looking to remove the intake manifold, replace the gaskets and the PCV Valve although struggling to find some where to buy the valve from.

Im not sure if the US model focus use the same valve as the Japanese/ Australian model vehicles.

Anyone have to purchase this before in AUS, or would going to ford be my best bet?

[russellw]

Check in the Genuine Ford Parts thread as to whether these are still available but I believe the part number for both LS & LT Focus 2.0 is 1S7G 9D475 AL and it fits multiple models with the 2.0L engine (including Mondeo).

[Unknown1]

Thanks for the reply mate. Pick one up from ford today. Cheers.