Another person running 9in K&N pod, 220KW EL Falcon.

[jjj]

Found this in carsales.com.au


http://www.carsales.com.au/used-cars...atchallpartial

cheers...

[au^dude]

Can that be done 220KW outa a NA I6? Thats would mean something like 190-200RWKW

[private9]

Originally Posted by au^dude

Can that be done 220KW outa a NA I6? Thats would mean something like 190-200RWKW

Not in that car! All it's got listed is an exhaust, chip and super duper air intake - who cares. And he thinks he's gonna pull 15k for it....

[Tocchi]

haha that pod filter is the same thats on my ute :P

[feebs]

SORRY FOR THREAD HIJACK.....
Tochi.. why is the xr going in for the dyno day and not the UTE??

Cheers

Craig

..

and as for the thread.. I would agree that 220 rwhp would be a bit much without more engine work..

[Tocchi]

because i cant guarentee the ute will be running (due to dizzy modification to install Wolf 3d)

[mcflux]

Originally Posted by private9

And he thinks he's gonna pull 15k for it....

Methinks he'll be pulling something else.

[Allen]

220HP at the wheels is more likely...

$15,000 is still a rip IMO... Looks like a nice car though.

[FRDXR6]

"S/Steel and Carbon Fibre Cold Air Intake, Powerchip GOLD, High Flow Extractors, High Flow Cat and strait through 2.5" Full Exhaust System = 220kw and very quick"

[5L]

i bet this bloke brought one of those ebay mod chips! 20kw+ at the rear wheels. he probably put 4 on em on his car thats 80kw's

[au^dude]

Faster than a V8 and WRX, duno bout that. OK some V8s but a WRX.

[private9]

Originally Posted by au^dude

Faster than a V8 and WRX, duno bout that. OK some V8s but a WRX.

Yeah, but you forget that it's got a cold air intake with a 9" pod filter...People seem to forget just how much power these give you. I personally have gained 69mph over the 1/4 with 3 of these.

[Tocchi]

Originally Posted by FRDXR6

"S/Steel and Carbon Fibre Cold Air Intake, Powerchip GOLD, High Flow Extractors, High Flow Cat and strait through 2.5" Full Exhaust System = 220kw and very quick"

my ef xr6 running: 1636 cam. pacemakers, 2.5" exhaust, K&N flat filter, the XH intake, and tuned with an EMS8860 is only pushing 200rw HP (not kw) ... he's only tricking himself hopefully, id hate to be a buyer of that and find the real power out on a dyno

[frd_crzer]

220kw he is full of it. grechie only just managed to get 174 at the wheels NA

[Molloy]

Originally Posted by frd_crzer

220kw he is full of it. grechie only just managed to get 174 at the wheels NA

I think he is talking flywheel

[private9]

Originally Posted by Molloy

I think he is talking flywheel

220kw @flywheel outta that is a load of crap.

[Obriza]

he doesnt say 220kw at the wheels... he just says 220kw so itll be at the motor... which works out to be around 165-170rwkw. Where does he say this 220kw is at the wheels?

[private9]

Originally Posted by Obriza

he doesnt say 220kw at the wheels... he just says 220kw so itll be at the motor... which works out to be around 165-170rwkw. Where does he say this 220kw is at the wheels?

Regardless, unless he's got a fairly big cam that he hasn't mentioned in the ad (which I doubt given the money he's quoted as being spent), then he's talking crap.

[Obriza]

Originally Posted by private9

Regardless, unless he's got a fairly big cam that he hasn't mentioned in the ad (which I doubt given the money he's quoted as being spent), then he's talking crap.

true, yeh i guess it is pretty hard to get into even 140rwkw without a cam... or a generous dyno

[webby_191189]

Originally Posted by Tocchi

my ef xr6 running: 1636 cam. pacemakers, 2.5" exhaust, K&N flat filter, the XH intake, and tuned with an EMS8860 is only pushing 200rw HP (not kw) ... he's only tricking himself hopefully, id hate to be a buyer of that and find the real power out on a dyno

How did you manage to get an XH intake on an EF? that just doesnt work

[Tocchi]

i guessed its the XH intake, i just bought the car on the monday just gone... it looks like a XH snorkle

[mcflux]

XH snorkles enter the top of the airbox, EF-EL and EB-EL V8 snorkels (and Tickford/GT equivalents) enter the bottom of the airbox ;)

-Dave-

[frd_crzer]

Originally Posted by Obriza

he doesnt say 220kw at the wheels... he just says 220kw so itll be at the motor... which works out to be around 165-170rwkw. Where does he say this 220kw is at the wheels?

i didnt say anything about the EL 220kw at the wheels read it again it says GRECHIE has got 174 rwkw

[ORSMEB]

Originally Posted by Obriza

true, yeh i guess it is pretty hard to get into even 140rwkw without a cam... or a generous dyno

I got 140.2rwkw without a cam. Only exhaust and pod

[mcflux]

However comparing a "kw" figure to a "rwkw" figure, one would assume that both figures are meant to be rwkw.

220kw would be roughly what Grechie has at the flywheel ;)