|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-01-2013, 11:05 AM
|
#1 | ||
|
Regular Member
Join Date: Dec 2012
Location: Brisbane QLD
Posts: 158
|
Hey guys, I've decided to ditch the electric window since I have now got 3 regulators that don't work.. I've picked up a manual winder regulator and door card, new glass and rubbers.. and I really don't know where to go from here!! I'm no good with doors- I probably should have been paying more attention when pulling them apart.
 |
||
|
|
|
04-01-2013, 11:15 AM
|
#2 | ||
|
Travis - 1999 Ford AU S1
Join Date: Sep 2008
Location: Toowoomba.
Posts: 432
|
Not sure if this helps, but here's the locations for the electric and manual toggles.
http://fordforums.com.au/showpost.ph...5&postcount=28
__________________
Trying to track down Hot Chilli Red (Not Maroon or Burgundy) AU Ford car parts & Fairmont Ghia parts. PM me if you have something. |
||
|
|
|
|
04-01-2013, 11:22 AM
|
#3 | ||
|
Regular Member
Join Date: Dec 2012
Location: Brisbane QLD
Posts: 158
|
Cheers dude looks like it might help. I just don't know how to attach the regulator to the window again lol. I picked up a new window that still has the clips attached as my old ones were buggered
|
||
|
|
|
|
04-01-2013, 11:38 AM
|
#4 | ||
|
Travis - 1999 Ford AU S1
Join Date: Sep 2008
Location: Toowoomba.
Posts: 432
|
When you say clips are still attached, do you mean the ones in the picture below?
If so, you'll have to use two flat head screw drivers and pry them off, slide the window out altogether (by tilting the window on an angle to pull it out), glue the clips back on to the window by using Sikaflex 230, do not use standard siliconne as you'll just have to do it again as it won't bond to the glass. http://i33.photobucket.com/albums/d8...50910_1334.jpg
__________________
Trying to track down Hot Chilli Red (Not Maroon or Burgundy) AU Ford car parts & Fairmont Ghia parts. PM me if you have something. |
||
|
|
|
|
04-01-2013, 06:52 PM
|
#5 | |||
|
I ♥ EDM
 
Join Date: Aug 2006
Posts: 5,141
|
Quote:
More information may reveal that youre simply missing something. |
|||
|
|
|
|
04-01-2013, 06:58 PM
|
#6 | ||
|
meh.
 
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Lol, probably just the switches have gotten clogged up with crap over the years. I had no working switches in the Fairlane, cleaned them out and now they work.
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
|
04-01-2013, 08:10 PM
|
#7 | ||
|
Regular Member
Join Date: Dec 2012
Location: Brisbane QLD
Posts: 158
|
When I pulled the window out of mine the clips basically fell off - seems like they had been dodgily stuck on a few times given the amount of **** on them.. I had no problems pulling windows out at the wreckers yesterday with the plastic clips still on.
Yeah didn't check the whole lot too thoroughly.. there was one i could hear trying to work when i had the door apart, but the window wasn't going anywhere.. so can't be the switches (i think lol). Now I spent 3 hours at the wreckers yesterday finding an au with manual winders in the front - I'm not changing my mind again! :p Cheers guys |
||
|
|
|
Putting drivers door back together!
Linear Mode
