|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-10-2009, 07:14 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
|
G'day all,
just wondering if anyone has had experience with removing replacing the headlining of a 4 door MK2 escort, and where possibably to get a new one? Cheers Daniel. |
||
|
|
|
07-10-2009, 08:24 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
new ones on eBay i think.
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
|
|
|
|
07-10-2009, 08:24 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
|
|
|
|
07-10-2009, 09:17 PM
|
#4 | ||
|
Regular Member
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
|
ah yeah cheers, what are they like to remove and re-install??
|
||
|
|
|
|
08-10-2009, 07:28 AM
|
#5 | ||
|
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
I have helped replace my old capri one with my mate who is a motor trimmer
obviously your windows are out you will need a spray glue, and plenty of clamps I have stolen a couple of picks from Marty's ute rebuild showing the trimmer putting the headlining in http://i252.photobucket.com/albums/h...c/DSC00677.jpg http://i252.photobucket.com/albums/h...c/DSC00679.jpg start at one end pulling it firm, then the other, then the sides.... not a very hard operation, but, not one to be rushed |
||
|
|
|
|
08-10-2009, 11:44 AM
|
#6 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 283
|
I had one made up by a motor trimmer for my old RS in black velour, came out awesome.
__________________
ZJ Fairlane 351C SY Territory Skicraft Excel 350 Mercruiser |
||
|
|
|
|
08-10-2009, 05:48 PM
|
#7 | ||
|
Regular Member
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
|
yeah everything is out, getting ready for a bare metal re-spray. feral, how much did it cost for the motor trimmer to do it for you?
|
||
|
|
|
|
09-10-2009, 11:36 AM
|
#8 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 283
|
It cost low $300's installed and that was many years back. I didn't realise it at the time, but the trimmer i used is very expensive for his work. Some of the cost surrounded having someone come in to remove and replace, the front, rear + the rear side windows (2 door). Looked fantastic.
__________________
ZJ Fairlane 351C SY Territory Skicraft Excel 350 Mercruiser |
||
|
|
|
|
12-10-2009, 02:05 PM
|
#9 | ||
|
74 mk1 2 door escort:
Join Date: Jul 2007
Location: Echuca, Vic
Posts: 40
|
i had a trimmer make 1 off a the pattern of the original 1 in my car that was stuffed. think it cost me $50 for him to do it and i supplied the material and fitted it myself. came up awesome
|
||
|
|
|
Headlining
Linear Mode
