|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
Thread Tools | Display Modes |
25-02-2005, 11:51 AM | #1 | ||
Starter Motor
Join Date: Feb 2005
Posts: 1
|
I was wondering if anyone could give me some advice on adjusting the rebound on my koni specials. I have an EB 6 and are about to install Super Low King springs with the Konis. I chose the Koni shocks because I wanted a decent ride quality and a low car with better than average handling.
I was thinking on leaving the koni's at their softest setting, but I thought with the heavy duty superlows it might be better to go one adjustment towards firmer, to avoid bottoming out and to better suit the superlows which I assume is a firm spring which needs control. Thanks, Dylan |
||
25-02-2005, 12:31 PM | #2 | |||
Banned
Join Date: Dec 2004
Posts: 689
|
Quote:
You could try adjusting tyre pressures as the ride becomes more compliant at (say) 32 psi compared to 36 psi, without sacrificing too much in the way of handling.
__________________
Rep Power: 0 |
|||
25-02-2005, 02:48 PM | #3 | ||
AWD Assassin
Join Date: Dec 2004
Posts: 8,170
|
The rebound adjust on the Konis is more of a "wear" adjustment device than a performance handling option. As the shock wears and gets more compliant, you just dial in more rebound force to ensure that you are still getting shock resistance to load variation.
It is best to keep them on the full soft setting until you need to dial them up again. Read here for more info : http://www.toperformance.com.au/tech_fs.html I've got them on my car and have them dialled up to half way.............but I've had them on my car for over 7 years now.
__________________
Old RIDE 2006 BFGT Gone but not forgotten New RIDE 2018 AMG Mercedes A45 Angry AWD assassin
|
||
25-02-2005, 02:59 PM | #4 | ||
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
is that the same for the yellows? with the instructions i got with them they say to firm them up whenever you want for better handling etc, or soften em for long comfortable trips.
|
||
25-02-2005, 03:09 PM | #5 | ||
AWD Assassin
Join Date: Dec 2004
Posts: 8,170
|
I don't know about the yellows.........I think they're classified as "sport".
I had a set of these on my first XE. They were externally adjustable via a plastic disc. The rebound adjust on the yellows may serve a greater purpose than what it does on the "REDS" I have noticed however that the "REDS" gave a heaps better ride and the handling trade off was negligible. Any which way you look at it, they're a top shock and I would recommend them to anyone.
__________________
Old RIDE 2006 BFGT Gone but not forgotten New RIDE 2018 AMG Mercedes A45 Angry AWD assassin
|
||
25-02-2005, 03:11 PM | #6 | |||
Banned
Join Date: Dec 2004
Posts: 689
|
Quote:
__________________
Rep Power: 0 |
|||
26-02-2005, 12:31 AM | #7 | ||
The Guy You Love To Hate
Join Date: Jan 2005
Location: Vic
Posts: 1,203
|
Ive got the Koni Reds on my EA. Of all the settings intermediate was probably teh best compromise. I hate how you have ot pull them out to adjust them though.
|
||