|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
17-08-2006, 08:46 AM
|
#1 | ||
|
Regular Member
Join Date: Oct 2005
Posts: 47
|
I Have Ef Fairmont And Drivers Door Electric Window Regulator Broke Yesterday,after Pulling Off Panel Do You Have To Drill Out 3 Rivits That Hold The Motor In Place So I Can Replace Motor And Regulator Or Is There Something Else That Holds Motor On Door,any Help Would Be Appreciated
|
||
|
|
|
17-08-2006, 04:13 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 514
|
i hit them out with a hammer lol.
|
||
|
|
|
|
17-08-2006, 04:40 PM
|
#3 | ||
|
growing up is optional
Join Date: Feb 2006
Location: Gawler area SA
Posts: 3,303
|
Drill out the 3 rivets that hold the motor in place. Support the glass and undo the two 10mm bolts that hold the glass to the regulator, then the 2 nuts and 2 bolts that hold the regulator to the door.
|
||
|
|
|
|
17-08-2006, 10:39 PM
|
#4 | ||
|
Regular Member
Join Date: Aug 2006
Posts: 286
|
I just replaced my whole assembelly was $180 For a generic..but better than Fords..
Fords $270 |
||
|
|
|
Ef Fairmont Replace Electric Window
Linear Mode
