Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 23-03-2007, 08:05 PM   #8
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by au2sw
all you guys need to do is remove the airbag assembly and it easy to clean the contacts under the key pads. you will need to get your hands on a set of torx bits to remove the bolts (the 2 bolts - 1 either side - are located just behind the steering wheel under a plastic clip on cover - a samll flat blade screw driver will remove the cover)then its a simple case of unpluging the airbag and placing it on cardboard face-up (this is important as static electricity can set it off , and since the force is out of the face of the assembly, if you place it face down, the assembly will fly up into the air and cause more damage) then remove the buttons and clean the contacts with a bit of metho on a cotton bud. then carefully replace everything and your done. BE SURE THE KEY IS IN THE OFF POSITION AT ALL TIMES!!!!
cleaning the contatcs normally fixes the probem in most cases, much cheaper than spending 70 bux too
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
 


Forum Jump


All times are GMT +11. The time now is 06:07 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL