|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-08-2007, 08:29 PM
|
#1 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
hey guys .
for my auto i want to get a hi stall. my au is an every day driver. iwanted to know. if i got a 3000 rpm converter will it affect how my car drives normally. how does it work? every time i go to take off do i have to stall it up to 3000. |
||
|
|
|
10-08-2007, 10:23 PM
|
#2 | ||
|
mezzo forte
Join Date: Dec 2006
Location: Geelong
Posts: 309
|
The stocker is a 1800rpm, but if you take off gently you'll notice that the revs will stay below 1800.
So the hi stall will slip like a clutch untill 3000rpm, then bite. If you take off normally there won't be a lot of difference, if you floor it then it will jump to 3000 and go from there. There have been plenty of threads on this. Do a search and you'll find more info, and help on choosing a good stall speed. I think 3000 is a bit much for a stock motor, but I could be wrong. Cheers Nic |
||
|
|
|
Stall Converter
Linear Mode
