|
|
|
|
|
19-04-2008, 10:29 PM
|
#1 | ||
|
FF.Com.Au Hardcore
 
Join Date: Nov 2007
Location: Riff
Posts: 12,457
|
G,day all,
Will the diff plate (cover) and Panhard rods from an EF/EL, fit on an AU diff, and are 6 and V8 covers the same size.? Cheers.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
|
|
|
19-04-2008, 10:53 PM
|
#2 | ||
|
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
Shouldnt be a difference between 6 and 8. Not sure about fitting on an AU diff though because of the different suspension. IRS vs live axle.
|
||
|
|
|
|
19-04-2008, 10:59 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2007
Location: Riff
Posts: 12,457
|
Nah i am not fitting the diff. I just need a new plate that the arms attach to- and at the wreckers there arent many AU's just lots of EF/EL's- so was hoping the plate and arms are same length so i can do a straight swap.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
|
|
|
|
20-04-2008, 04:53 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
i know the arms will be differenf as the AU has a different offset so this would mean a different over all diff length
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
21-04-2008, 11:51 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2007
Location: Riff
Posts: 12,457
|
So what i need is a new cover (with the spindle hanging out) and new bushes in the panhard rods. (as the old ones are now covered in diff oil and are very worn)
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
|
|
|
Diff plate.
Linear Mode
