![]() |
|
![]() |
#1 | ||
Regular Member
Join Date: Oct 2008
Posts: 348
|
Should I add a bit of demineralised water to the tank just to get the level up to cold max? When engine is cold it’s on the cold min level. Should I worry? Thanks BF XR6 n/a
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Regular Member
Join Date: Jun 2015
Posts: 415
|
Where is in when engine is at operating temp?
I keep my cold level right in the middle of the two and when hot, it is just above the max line. |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Regular Member
Join Date: Oct 2008
Posts: 348
|
Ok when it’s at normal operating temperature and idling the level is just slightly under the cold max line. Seem ok?
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Jun 2015
Posts: 415
|
I think so mate. As long as it is between the two marks when cold it should be sweet. I usually check every week or so to make sure the cold level is still the same.
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Regular Member
Join Date: Oct 2008
Posts: 348
|
Thanks- I do usually check it regularly although not for a while and whilst it’s on the cold min level or very very slightly under its nowhere near the hot max line when running at normal temp and idling..
|
||
![]() |
![]() ![]() |